517151
1
Verklein
Vergroot
Pagina terug
1/31
Pagina verder
1. CONTENTS
1
1. Contents ......................................................................................................................... 1
2. Control Location .............................................................................................................. 3
3. Before Riding .................................................................................................................. 4
4. Safe Riding ..................................................................................................................... 4
5. Driving ............................................................................................................................. 5
6. Use Genuine Spare Parts ............................................................................................... 5
7. Use of Each Component ................................................................................................. 6
Gauges ............................................................................................................................. 6
Operation of Ignition Switch ................................................................................................. 8
Use of Buttons ................................................................................................................... 9
Goods Hook .................................................................................................................... 12
Saddle Lock ......................................................................................................................12
Storage Box ......................................................................................................................12
Pillion Step........................................................................................................................12
Fuel Tank Cap ................................................................................................................. 13
Cup Frame ...................................................................................................................... 13
Brake ............................................................................................................................. 14
8. Important Points and Cautions for Starting Engine ....................................................... 15
9. The Best Way to Drive off ............................................................................................. 16
The Control of Throttle Valve Handle .................................................................................. 16
Parking Method ................................................................................................................ 16
10. Inspection and Maintenance before Riding ................................................................... 17
Routine Inspection ........................................................................................................... 17
Engine Oil Inspection and Change ...................................................................................... 17
Fuel Inspection ................................................................................................................ 18
Transmission Oil Inspection and Change ............................................................................. 18
Inspection and Adjustment of Brake Free Play ..................................................................... 19
Disc Brake Inspection ....................................................................................................... 19
Throttle Valve Handle Clearance Adjustment ....................................................................... 20
Inspection and Maintenance of Battery ................................................................................ 21
Tire Inspection ................................................................................................................. 22
Steering Handle Front Shock Absorbers Inspection .............................................................. 22
Rear Cushion Hardness Setting ......................................................................................... 23
Checking and Changing Fuses .......................................................................................... 23
Checking the Turn Signal Lights and Horn ........................................................................... 23
2. CONTROL LOCATION
3
Fuel tank cap
Pass / High & Low beam
/
Turn signal / Horn switch
Front brake lever
Front And Rear
brake lever
Side stand
Main stand
ENG. Stop / Light / Starter switch
Storage
box
Muffler
Coolant
filler cap
Ignition
switch
Fuses.
Turn signal
light
Head light /
Fo
ggy
li
g
ht
Tail light/
Turn signal
light
Seat lock.
3. BEFORE RIDING
4
This manual describes the correct usage of this scooter including safety riding, simple inspection methods
and so on.
For a more comfortable and safety riding, please read this manual carefully.
For your benefit, please ask your SANYANG dealer the operating manual and carefully read the
following:
Correct use of the scooter.
Pre-delivery inspection and maintenance.
Thank you very much for your patronage
In order to maximize your scooter’s performance, a periodical inspection and maintenance should be
completely carried out.
We recommend that after riding your new scooter for the first 300 kilometers, you should take your
scooter to the original dealer for an initial inspection, and to have your scooter inspected periodically
every 1000 kilometers thereafter.
In case the scooter’s specifications and construction are modified and different from the photos and
diagrams on the owner’s manual / catalogues, the specifications and construction of the actual scooter
shall prevail.
4. SAFE RIDING
It is very important to be relax and clothe properly when driving, observe traffic regulations, do not rush,
always drive carefully and relaxed.
Usually, most people would ride their newly bought scooter very carefully, but after they became familiar with
their scooters, they tended to become reckless which may result in an accident.
To remind you:
Please wear a safety helmet, and properly tighten the chin belt when riding a scooter.
Clothes with open or loose cuffs may be blown by wind and cause the cuffs to get caught on the
steering handle and thus affects riding safety.
So, put on clothes with tight sleeves.
Hold the steering handle by both hands when riding. Never ride with only one hand.
Observe the speed limit.
Wear suitable low-heel shoes.
Perform periodical maintenance and inspection in accordance with the schedule.
WARNING!!
To avoid getting burned by exhaust pipe when taking a passenger. Make sure your passenger has
put his/her feet on the pedals.
After running, the exhaust pipe is very hot, be careful not to get burned when conducting an
inspection or maintenance.
After running, the exhaust pipe is very hot, select a suitable location to park your scooter to avoid
others getting burned by the exhaust pipe.
CAUTION:
Modified scooter will affect its structure or performance, and cause poor engine operation or exhaust
noise, which will result in shortening the scooter’s service life.
Besides, modification is illegal and does not conform to the original design and specifications.
A modified scooter will not be covered by warranty, therefore, do not modify your scooter at will.
5. DRIVING
5
Keep the related parts of your body such as arms, palms, lumbar, and toes relax and ride with the most
comfortable posture in order to be able to react quickly whenever it is necessary.
Rider’s posture will greatly affect riding safety. Always keep your body’s gravity in the center of the
saddle, if your body’s gravity is on the rear part of saddle, the front wheel load will be reduced, and this
will cause the steering handle shaking. It is dangerous to ride a scooter with an unstable handle.
It will be much easier to make a turn if rider inclines his body inward when turning. On the other hand,
the rider will feel unstable if his body and the scooter do not incline.
The scooter is hard to control on a bumpy, unleveled, unpaved road, try to know the road conditions in
advance, slow down and use your shoulder’s force to control the handle.
Suggestion: Do not load objects on the front pedals unnecessarily, to avoid affecting the riding safety
and the operation of steering handle.
CAUTION:
The rider’s feeling on the handle is slightly different with a load or without a load.
Overload may cause the handle to swing and affects the riding safety.
Therefore, do not overload your scooter.
CAUTION:
Do not place flammable materials such as rags between the body side cover and engine to avoid
components damaging by fire.
Do not load objects on areas not specified for loading to avoid damage.
SUGGESTION
To maximize the scooter’s performance and prolong its service life:
The first month or first 1000km is the wear- in period for the engine and components.
Avoid rapid acceleration, and keep the speed below 60km/hr.
6. USE GENUINE SPARE PARTS
In order to maintain the scooter’s best performance, each part’s quality, material, and machined precision
must conform with the design requirements. “SYM Genuine Spare Parts” were made from the same high
quality materials used for the original scooter. No parts would be sold to the market until they could meet
the designed specifications through sophisticated engineering and stringent quality control. Therefore, it is
necessary to purchase “SYM Genuine Spare Parts” from “SYM Authorized Dealers or Franchised
Dealers” when replacing spare parts. If you buy cheap, or fake substitute parts from the market, no
guarantee can be provided either for the quality or durability. Also, it may result in unexpected troubles and
lower the scooter’s performance.
Always use SYM Genuine Spare Parts to keep your scooters pure blood and to ensure its long service
life.
7. USE OF EACH COMPONENT
6
(The following is SYM 4 stroke liquid cooling scooter’s basic operation, and they could vary from different
individual models. Please consult the end of this manual.)
Gauges
CAUTION :
Before battery installation, please do not use the kick starter to start the engine, in prevention
Not to have trouble on electrical meter working, or damage the electrical meter.
Do not wipe plastic components, e.g. instrument panel, headlight, with organic solvents such
As gasoline…etc. to avoid damaging these components.
INFORMATION OF THE GAUGE BOTTON
1. O / R : clear the oil reset.
2. T / T : switch between total kilometer and trip kilometer.
3. T / R : clear the trip kilometer.
4. HOUR : time( hour) setting.
5. MIN : time( minute) setting.
High Beam Indicator( blue)This indicator comes on with high beam headlight is turned on.
Foggy Indicator(green)This demonstrated the fog lamp opens.
Storage box IndicatorThis demonstrated the Storage box lamp opens.
Turn Signal Indicator(green)The left or right Indicator will be flashing according to the operated
directions of turn signal light switch when it is turned on.
Fuel Gauge
The fuel gauge doesn’t come on when the main switch is at “OFF” position.
When key switch is turned to “ON”, and the “pointer” indicates above “E” position, it shows how much fuel in
the tank, and also the fuel indicator light keeps coming on. When the “pointer” is below “E” position, the fuel
indicator flashes, and the fuel warning indicator(orange) will come on. It means there is only approximately
1.2 liter of fuel left in the tank. Refuel octane 92/95/98 unleaded gasoline immediately.
Engine Coolant
Temperature
High Beam
Indicator
Fuel
Indicator
Turn Signal
Indicator
Turn Signal
Indicator
Odometer
Speedometer
Fuel Warning
Indicator
Odometer set button
Time set button
Foggy
Indicator
tachometer
Oil Reset Key
Engine Oil Charge
Storage box Indicator
Side
Stand
Battery Charge Alarm
7. USE OF EACH COMPONENT
7
Odometer
This odometer shows the total kilometers this scooter has been driven.
Total kilometer : This shows the total kilometers of this scooter. It shows six digits; 5 in kilometers and 1 in
hundred meter. (The total kilometer will return to zero if it runs over 100,000 kilometers.)
Trip kilometer : The rider can measure the trip kilometers. It shows four digits; 3 in kilometers and 1 in
hundred meter. (The trip kilometer will return to zero if its measurement is over 1,000 kilometers.)
Engine Coolant Temperature
To indicate engine coolant temperature.
When the main switch turns to “ON”, the LCD and the water temperature indicator keeps coming on.
Normally, the LCD indicator should be below the (H) position when the scooter is operating. If the LCD
indicator stays above (H) position, the water temperature indicator flashes. Please check the coolant level
of spare coolant tank and check cooling fan for proper operation.
CAUTION:
The indicator will stay above (H) position when engine is run under high temperature for a long period
of time. In this case, the only way to cool the engine is to stop the engine.
Time setting
Set time in 24 hour mode.
When the main switch turns to “ON” the clock shows hours and minutes in 24 hour mode.
At this “Time mode” press HOUR and MIN bottom at the same time, and enter the “Time setting mode”.
At this moment the time digit flashes: press the HOUR bottom once and the hour increases. Keeping on
pressing for 2 seconds can accelerate the adjustment. (The minute adjustment by MIN bottom is the same
like this.)
At “Time setting mode” press HOUR bottom and this bottom will not flash for 2 seconds. (The same as
MIN bottom.)
When time setting completed. Press ALARM bottom or without pressing HOUR or min bottom for 3
seconds to exit “Time setting mode”.
7. USE OF EACH COMPONENT
8
OPERATION OF IGNITION SWITCH
IGNITION SWITCH IGNITION SWITCH KEY
"Start" position
Engine can be started in this position.
Ignition switch key can not be removed.
"Stop" position
Engine is shut off and can not be started in this
position .
Ignition switch key can be removed.
"Steering handle lock" position
Turn the steering handle to left and press
ignition switch key down and then lightly turn it
to left to the “LOCK” position.
The steering handle is locked in this position.
Ignition switch key can be removed.
When unlocking, simply turn the key from
“LOCK” to “OFF.”
"OPEN" position
(fuel tank cap open)
How to openInsert your key into the ignition switch, and turn it to the left.
How to lockPush the fuel tank cap and it locks automatically.
CAUTION:
Never operate the ignition switch key when the scooter is running. To turn the ignition switch to
“OFF” and “LOCK,” will shut off the electrical system and that may result in a dangerous accident.
Therefore, the ignition switch can only be turned off after the scooter has been completely
stopped.
Always remove the key and be sure to take the key away with you after locking the steering
handle before leaving your scooter.
If ignition switch remains in the “ON” position for a prolonged period after the engine has been
stopped, the battery’s capacity will be reduced and this may affect the engine’s start ability.
7. USE OF EACH COMPONENT
9
USE OF BUTTONS
Light Switches
When the switch is turned to this position as the engine is being started, headlight, rear light, instrument
panel light, and position light will come on.
Note:
Position Light Function:
This light can indicate the scooter position when the scooter is running in dim, rainy, or foggy weather.
When the switch is turned to this position as the engine is being started, rear light, instrument panel
light, and position light will come on.
When the switch is turned to this position, all lights will go off.
Engine Stop Switch
Switch to this position to turn off the engine when a state of emergency.
Switch to this position and the engine can be started.
Li
g
ht Switches
Electrical
Starter Button
High/Low Beam
Switch
Turn Signal Switch
Horn Switch
Passing switch
Engine Stop
Switch
7. USE OF EACH COMPONENT
10
Electrical Starter Button
This is a starting motor button (switch) for engine starting.
With the main switch "ON", press this button while holding the front or rear brake lever will start
the engine.
CAUTION:
Release this button immediately after engine has been started, and never press the button again
to avoid damaging the engine.
This mechanism is a safety design. The engine can only be started after the front or rear brake
lever (pedal) has been applied.
Do not use light system. Turn headlight and turn signal lights to the “OFF” position when the
engine is being started.
High/Low Beam Switch
This is the high and low beam of headlight switching switch. Press this switch to switch between high and
low beams.
This is for high beam.
This is for low beam. (Please turn to low beam when riding in city)
Passing Switch
Turn ignition switch “ON” and press this button down. Then, the high beam of headlight will come
on immediately to warn the driver of the vehicle ahead that you intend to overtake him/her. (For
overtaking, high beam indicator will come on at this time) This button will return to original
position after releasing
Horn Switch
Press this button down when ignition switch is in the “ON” position, the horn will sound.
CAUTION:
Do not press this button when you are in the area where there’s no honking.
Hazard Switch
The main switch in the ON position, cuts
according to this switch, four directions
lantern festivals dodge extinguish do move,
also can simultaneously dodge on the
display board direction indicating lamp
extinguishes does moves. If stops the
vehicle has when the transportation
frequent dangerous position or the vehicle
the breakdown, may use the dangerous
police to show the switch.
The main switch in the ON position,
hazard switch only then may close.
Fog lamp Switch
This is for fog lamp.
7. USE OF EACH COMPONENT
11
Turn Signal Switch
Turn signal lights are used when turning left/right or changing lane.
Turn ignition switch to “ON”, and slide the turn signal switch to left or right. Then, the turn signal lights will
flash.
To release, simply return the turn signal light button to the original position.
Right-side turn signal light flashing means you intend to make a right turn.
Left-side turn signal light flashing means you intend to make a left turn.
Power supply comp
The accessory socket is inside the inner box .You can use the accessory socket to power a trouble light,
PDA, spotlight, radio, or cell phone, etc.
CAUTION:
y Do not plug in any head-generating accessory such as an automobile cigarette lighter because it
can damage the socket.
y Do not use the socket in raining day.
y Do not splash water or other liquid on socket when using the socket.
To use accessory socket, turn the ignition switch ON to start the engine. Then turn the headlights OFF , and
open the accessory socket cap.
The accessory socket’s rated capacity is DC 12V, Max 60Watts (5A) and below long-term usage 4 hours.
7. USE OF EACH COMPONENT
12
GOODS HOOK
Hangs up the goods
SADDLE LOCK
Unlock:
Insert the ignition switch key and turn to left to unlock.
Lock:
Press the saddle down and it will be locked automatically.
After the saddle has been locked, check to make sure it has been locked properly by lightly lifting the
saddle.
CAUTION:
Do not put the key inside the storage box after unlocking to avoid the key being locked inside the
storage box when the saddle is pressed down automatically.
Be sure to remove the key after the saddle has been locked.
STORAGE BOX
This box is located under the saddle.
Maximum load capacity: 10kg.
Do not store valuables in the box.
Make sure that the saddle has been locked completely after it was pressed down.
Take out valuables before washing to avoid wetting these objects.
Do not place thermal sensitive objects in the box because of engine’s heat and high temperature.
PILLION STEP
Press down the button and the pillion step goes out.
Goods hook
Pillion
7. USE OF EACH COMPONENT
13
FUEL TANK CAP
Fuel refilling
1. Insert ignition switch key into the ignition switch, and turn the key to the left, then the cap can be removed.
2. Do not fill above the fuel upper limit when refueling.
3. Holds down “PUSH” downward to press, hears to the “CLICK” sound, Fuel tank cap can be locked.
CAUTION:
Main stand should be put down on the ground, engine should be shut off and flames should be
strictly prohibited to ensure safety when refueling.
Do not fill above fuel upper limit when refueling. Otherwise, fuel will flow out through a hole on
the cap that may damage the body’s painting, in serious cases, it may cause a fire to burn down
the scooter.
Make sure the cap has been tighten properly.
CUP FRAME
The cup holder is located in the center of floor panel.
Fuel tank cap
8. IMPORTANT POINTS AND CAUTIONS FOR STARTING ENGINE
15
CAUTION:
Please check the engine oil and fuel volume are adequate or not before starting engine.
To start engine the main parking stand must be firmly on the ground and the brake is applied on the
rear wheel to prevent the scooter from moving forward suddenly.
Turn ignition switch key to the “ON” position.
1. Apply rear wheel brake.
2. Do not accelerate, press starter button when the brake is applied.
-
[We care for you! Before drive off, keep the hand brake applied on the rear wheel.]
CAUTION:
If engine can not be started after starter motor running for 3~5 seconds, turn the throttle valve handle
1/8~1/4 turns, and then press starter button again for an ease start.
In order to avoid damaging the starter motor, please do not press the starter button continuously over
15 seconds.
If engine still can not be started after pressing starter button over 15 seconds, stop and wait for 10
seconds before start it again.
It is harder to get the engine started after the scooter has been left idle for a long time or after refueling
only after the fuel has been depleted. Then, it is necessary to press starting lever or starter button
several times, and keep the throttle valve handle at the close position to start the engine.
It may need several minutes to warm up engine if it is a cold start.
Exhaust contains harmful gases (CO), therefore please start the engine at a well ventilated place.
When starting engine with starting lever(For HNAHTA only)
After step 1 is completed, press the starting lever forcefully by foot with the throttle valve handle at the close
position.
If engine is difficult to start with the starting lever when the engine is cold, rotating the throttle valve 1/8~1/4
turns will make the start easier.
Put the starting lever back to its original position after the engine has been started.
CAUTION:
Firmly support the scooter with the main parking stand before starting the engine with the starting
lever.
Start engine with the starting lever occasionally to prevent it from loosing its function because of
unused for a long time.
1/8
1/4
10. INSPECTION AND MAINTENANCE BEFORE RIDING
27
CHECKING THE AIR CLEANER
DISASSEMBLE PRCEDURE
1. Remove mounting screws from air cleaner cover.
2. Remove the air cleaner cover, then remove filter element.
3. Take the element out and clean it. (Refer to maintenance schedule.)
ASSEMBLE PRCEDURE
Assemble the air cleaner in reverse order of disassemble.
CHECKING THE LEFT CRANKCASE COVER AIR CLEANER
DISASSEMBLE PRCEDURE
1. Remove mounting screws from left crankcase cover.
2. Remove the left crankcase cover, then remove filter element.
3. Take the element out and clean it. (Refer to maintenance schedule.)
ASSEMBLE PRCEDURE
Assemble the air cleaner in reverse order of disassemble.
CAUTION:
Dust deposit is one of the major causes of reducing output horsepower and increasing fuel
consumption.
Change the air cleaner element more frequently to prolong the engine’s service life if the scooter is
driven on dusty roads very often.
If air cleaner is installed improperly, dust will be absorbed into cylinders, which may cause a
premature wear and reducing output power and engine life.
Be careful not to soak the air cleaner when washing the scooter. Otherwise, it will cause engine
hard to start.
Screw
Element
Screw
Screw
Left crankcase cove
air cleaner
11. WHEN THERE IS AN ABNORMAL CONDITION OR A TROUBLE
28
DIAGNOSIS WHEN ENGINE DOES NOT START
(1). Has the ignition switch
key been turned to “ON”
position?
(2). Is there enough fuel in the fuel
tank?
(3). Is the rear or front wheel
brakes applied when pressing
starting button?
(4). Do you rotate the throttle valve handle while
pressing starting the button?
(5). Turn the ignition switch key “ON”, and press
horn button down, if the horn does not sound,
the fuse may have been blown.
Have your scooter checked by SYM authorized dealer or franchised dealer immediately if there are no
problems with the above items and engine still can not be started.
12. C.D.I. ELECTRICL IGNITION SYSTEM
The charge and discharge principle of a condenser is adopted for the C.D.I system to supply electrical energy
created by generator’s coil, to the ignition coil in accordance with specified ignition timing so that the spark
plug may generate sparks as required.
13. SUGGESTIONS ON ENGINE FUEL
This scooter is designed to use UNLEADED gasoline of Octane No. 90 or higher.
If the scooter is operated in high attitude (where the atmosphere pressure is lower), it is suggested that the
air/fuel ratio should be readjusted to maximize the engine performance.
14. TRANSMISSION OIL
Recommended Oil: Genuine SYM HYPOID GEAR OIL (SAE 85W-140)
Turn signal
light switch
Horn button
For Front Wheel
For Rear Wheel
1/4
1/8
15. CAUTIONS FOR RIDING SCOOTER
29
1. Raise the scooter with the main stand, and sit on the saddle.
Push the scooter forwarding to raise the main parking stand.
CAUTION:
Never rotate the throttle valve handle at will to increase the engine RPM before driving off.
2. Get on the scooter from the left side, and sit on the saddle properly, keep your feet firmly on the ground to
prevent the scooter from falling.
CAUTION:
Apply brake on the rear wheel before driving off.
3. Rotate the throttle valve handle slowly, and then the scooter will begin to move.
CAUTION:
Rapidly rotate the throttle valve handle may cause the scooter moving forward suddenly and it is
very dangerous.
Make sure the side parking stand is spring back completely before driving off.
Do not use the brake suddenly and make a sharp turn
Rapid braking and sharp turning will cause slip and fall.
Rapid braking or sharp turning will cause slipping, lateral slipping, or fall especially in rainy days when the
road is wet and slippery.
Drive with extreme caution during rainy days
The brake distance in rain day or on wet road will longer than that on a dry road. Therefore, slow down
and prepare to apply the brake earlier.
The throttle valve handle should be released, and the brakes should be properly applied as it is needed
while reducing the speed when going down a slope.
16. PERIODICAL MAINTENANCE SCHEDULE
30
Maintenance
kilometer
300KM
Every
1,000KM
Every
3,000KM
Every
6,000KM
Every
12,000KM
Item
Check Items Maintenance Interval
NEW 1 Month
3
Months
6
Months
1 Year
Remarks
1 Air cleaner element(Remark) I C R
2 Oil filter(Screen) C C
3 Engine oil R I
Replacement for every
3,000KM
4 Tire, pressure I I
5Battery I I
6 Spark plug I I R
7 Carburetor(idle speed) I I
8 Steering bearing and handles I I
9 Check Transmission for leakage I I
10 Check crankcase for leakage I I
11 Transmission Oil R
Replacement for every 5,000KM
(5 Months)
12 Drive Belt/roller I R
13 Fuel tank switch and lines I I
14 Throttle valve operation and cable I I
15 Engine bolts and nuts I I
16 Cylinder head, cylinder, and piston I
17 Exhaust system/cleaning carbon I
18 Cam Chain/ignition time I I
19 Valve clearance I I
20 Shock absorbers I I
21 Front/rear suspension I I
22 Main/side stands I I/L
23 Crankcase Blow-by system(PCV) I I
24 Coolant I I R
25 Cooling fan, lines I I
26 Clutch disk I
27 Brake mechanism/brake lining (pad) I I
28 Bolts/nuts for each components I I
The above maintenance schedule is established by taking the monthly 1000 kilometers as a reference
which ever comes first.
Have your scooter checked and adjusted periodically by your SYM Authorized Dealer or Franchised
Dealer to maintain the scooter at the optimum condition.
Code: I ~ Inspection, cleaning, and adjustment R ~ Replacement
C ~ Cleaning (replaced if necessary) L ~ Lubrication
Remark: 1.Clean or replace the air cleaner element more often when the scooter is operated on dusty
roads or in the Heavily- polluted environment.
2. Maintenance should be performed more often if the scooter is frequently operated in high
speed and after the scooter has accumulated a higher mileage.
Notes in the remarks are used to indicate the applicable models.
17. SPECIFICATION
31
Model GTS 250 GTS 200 GTS 125
Item Specification LM25W LM18W LM12W
length 2,165 mm
width 870 mm
Height 1,380 mm
Wheel base 1,495 mm 1,475 mm
Net Weight 173 kg 165 kg 163 kg
Type 4- stroke 4V electroplated ceramic cylinders engine
Fuel
UNLEADED(OCTANE 92 OR HIGHER)
Cooling type
Water-cooled
Displacement
250.6 cc 171.2cc 124.5cc
Compression ratio
10.5:1 10:1 10.5:1
Max. HP
21 ps / 7,500 rpm 14.5 ps / 8,000 rpm 11.4 ps / 8,500 rpm
Max. torque
2.2 kgf-m / 6,500 rpm 1.4 kgf-m / 6,500 rpm 1.01 kgf-m / 7,000 rpm
Starting methods
Electrical & foot type
Front shock absorber
TELESCOPE
Rear shock absorber
UNIT SWING
Clutch
Centrifugal type
Transmission
CVT
Front tire
110 / 90-13 56P
Rear tire
130 / 70-13 57P 130 / 70-12 64P
Wheel
Aluminum alloy
Tire pressure
Front: STD 1.5kg/cm
2
,
Rear: STD 2.25 kg/cm
2
for 1 person,2.5 kg/cm
2
for 2 person
Front brake Disc type (Ø 240 mm)
Rear brake Disk type (Ø 220mm)
Front light bulb(high, low) 12V 55W / 55W
Brake light bulb(tail light) LED
License light bulb LED
Turn signal light bulb 12V 21W×4
Engine oil capacity
1.4 L (1.2 L for change) 1.0 L (0.8 L for change)
Transmission oil capacity
180 cc.
(170 cc. for change)
110 cc.
(100 cc. for change)
Fuel tank capacity 12 L 8.5 L
Fuse 20A×3, 15A×2
Spark plug NGK CR 8E
Battery capacity YTX12-BS YTX9-BS
Air cleaner Paper type
Fuel tank cap Open lock type
Front light General type (single)
Rear grab frame Can not load cargo
SYMEN 2005/05
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sym GTS 200 Joymax bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sym GTS 200 Joymax in de taal/talen: Engels als bijlage per email.

De handleiding is 0,5 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info