- 29 - EN
1C29
INDEX SEARCH
This feature provides a method of indexing the start-
ing point so that it can be easily returned to in either
fast forward or rewind mode.
•
The index mark will be made automatically when
the RECORD button is pressed. It will also be
marked at the starting point of Timer recording and
OTR.
•
The index mark will not be recorded if the PAUSE
button is pressed and released during recording.
•
The time gap between making the index marks on
the tape should be greater than 1 minute for SP
recording, 2 minutes for LP recording and 3 min-
utes for SLP recording.
•
In some cases, the index mark at the beginning of
video tape cannot be detected.
Example: You are watching program number 4 and
want to fast forward to program number 7. You
must skip three programs.
TV/VCR
1 Select “INDEX SEARCH”
Press the SETUP button on the
remote control.
Press the Arrow button K or L to
point to “INDEX SEARCH”. Then
press the ENTER button.
2 Enter your desired number
Press the Arrow button K or L until
the number of programs that you
want to skip appears.
(Example: “03” for 3 programs)
•
The Index Search mode will be
canceled if the procedures are not activated in 30
seconds.
3 Begin Index Search
Press the Arrow button s or B. The TV/VCR/DVD
begins rewinding or fast forwarding to the beginning
of desired program.
NOTE: Every time an index signal is skipped, the
number in the program indicator decreases by one.
4 After Index Search
When the preset program is reached, the
TV/VCR/DVD will start playback automatically.
•
A video cassette must be inserted in the
TV/VCR/DVD for this function to work.
•
The number of Index Searches can be set up to 20.
•
This function will not operate in the recording mode.
•
When you want to cancel the Index Search while
in progress, press the STOP button.
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
B INDEX SEARCH
INDEX SEARCH
0 3
SPECIAL FEATURES
REAL TIME TAPE COUNTER
This shows the elapsed recording or playback time in
hours, minutes, and seconds. (The displayed time will
not change on a blank tape or blank portions on the
tape.)The “–” indication will appear when the tape has
rewound further than “0:00:00” on the tape counter.
TV/VCR
AUTO REWIND-EJECT
•
When the end of a tape is reached during record-
ing, playback, or fast-forward, the tape will auto-
matically rewind to the beginning. After rewinding
finishes, the TV/VCR/DVD will eject the tape and
turn itself to off.
•
This function is operative when Repeat Play is set
to the [OFF] position.
•
The tape will not auto-rewind during timer record-
ing or One Touch Recording.
TV/VCR
