707203
4
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
Notes on primary and secondary batteries
Batteries/rechargeable batteries must be kept out of the reach of children.
Do not leave batteries/rechargeable batteries lying around; they could be swallowed by chil-
dren or pets. If swallowed, consult a doctor immediately, it could be fatal!
Be sure to observe the polarity (positive/+ and negative/- marks) and insert the batteries into
the table clock and the remote control the right way around.
Make sure that batteries/rechargeable batteries are not short-circuited, dismantled or thrown
into a re. There is a risk of re and explosion!
Do not recharge normal, non-rechargeable batteries; they may explode! Recharge recharge-
able batteries only.
Old or at batteries can leak liquid chemicals that may damage the device. If not used for a
longer period (e.g., in case of storage), remove the inserted batteries/rechargeable batteries.
Leaking or damaged batteries/rechargeable batteries can cause acid burns if they come into
contact with the skin; therefore, wear suitable protective gloves.
Liquids leaking from batteries/rechargeable batteries are very chemically aggressive. Objects
or surfaces coming into contact with these liquids may be severely damaged. Therefore, keep
batteries/rechargeable batteries in a suitable location.
For the correct disposal of batteries/rechargeable batteries, please read the chapter „Dis-
posal“.
Operating controls
1 Cover
2 Clip to open the cover
3 MicroUSB socket
4 On/Off switch
5 Slot for microSD memory card
6 Red LED
7 Blue LED
8 ” button
9 Key „1“
10 Key „2“
11 Rechargeable battery compartment
12 Microphone/Loudspeaker
13 IR-LEDs
14 Camera
15 “SET” button
16 “DOWN” button
17 „UP” button
18 Display
Operating instructions
Table clock with camera
Item no. 1882082
Intended use
The product is used as a table clock with alarm function. It has an integrated HD video camera, however, this
special feature is not visible at rst glance. Videos (with sound) or photos can be recorded onto a microSD
memory card (not included, please order separately).
Voltage/power is supplied by the replaceable, rechargeable lithium battery. The battery can be charged via
USB. The product can be also used as a Webcam.
Please keep in mind that you will render yourself liable to prosecution if you use this camera to keep persons
under observation without their knowledge and approval. Observe the rules and regulations of the country
where you are using the camera.
For safety and compliance reasons, the product must not be converted or modied in any way. If you use the
product for other purposes than those described above, the product may be damaged. Moreover, improper
use involves risks such as short-circuits, re, electric shocks, etc. Please read the operating instructions
carefully and do not discard them. Please include these operating instructions when you pass the product
on to a third party.
This product complies with the applicable national and European Regulations. All names of companies and
products are the trademarks of the respective owners. All rights reserved.
Package contents
Table clock
Lithium battery, type 18650, for table clock
Remote control
CR2032 battery for RF 2.4 G remote control
USB cable
Operating instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the QR code.
Follow the instructions on the website.
Symbols explained
An exclamation mark in a triangle indicates important instructions in these operating instructions
which absolutely have to be observed.
The arrow symbol indicates specic tips and advice on operation.
Safety instructions
Please read the operating instructions carefully and pay particular attention to the safety
instructions. We do not assume liability for any injuries/material damages resulting from
failure to observe the safety instructions and the information in these operating instruc-
tions regarding the proper use of the product. Furthermore, in such cases, the warranty/
guarantee will be null and void.
a) General information
The product is not a toy. Keep out of the reach of children and pets.
Do not carelessly leave the packaging material lying around. It may become a dangerous
plaything for children.
Protect the product from extreme temperatures, direct sunlight, strong vibrations and combus-
tible gases, vapours and solvents.
Never expose the product to mechanical stress.
The product must not be operated in explosive environments.
If safe operation is no longer possible, take the device out of service and secure it against
unintended use. Safe operation is no longer possible, if the product:
- shows visible damage,
- no longer functions properly,
- has been stored under adverse ambient conditions for an extended period of time or
- has been exposed to considerable strain during transport.
Please handle the product with care. The product can be damaged if crushed, struck or
dropped, even from a low height.
If you have doubts about how the product should be operated or how to safely connect it,
consult a qualied technician.
Maintenance, adjustment and repair work should only be carried out by an expert or a spe-
cialised workshop.
If you have any questions that are not answered in these operating instructions, please con-
tact our technical customer service or another specialist.
b) Operation
Only use the device in a moderate climate, do not use it in a tropical climate. For more infor-
mation on acceptable environmental conditions, see the chapter “Technical Data”.
Turn off the product when it is not in use.
Please remove the batteries, if you won’t use the product the product over a longer time
(such as storage). Old batteries/rechargeable batteries can leak and damage the product!
Afterwards, keep the product in a clean and dry place out of reach of children.
19 Recess (e.g., for a coin) to open the cover to
change the batteries
20 Button „A“
21 Button „C”
22 Opening for the key ring
23 Button „D“
24 Button „B“
25 LED for functional checks (lights up briey
when the button is pressed)
Inserting the battery into the table clock, charging the battery
Open the cover (1) on the back of the table clock. To do this, push the clip (2) upwards using your nger-
nail for example; now you can remove the cover.
Insert the supplied battery with the correct polarity (be sure that markings on the battery and in the bat-
tery compartment match).
Fit the cover the right way round until it snaps into place.
To recharge the rechargeable battery, connect the microUSB connector to a USB port (output voltage
5 V/DC, min.1 A) with the USB cable enclosed.
Depending on the charge level, it may take up to 5 hours until the battery is fully charged.
The blue LED (7) ashes while the battery is charging. Once the rechargeable battery is fully
charged, the blue LED (7) burns steady.
If you do not use the table clock for a longer time (for example, for storage), remove the battery
from the table clock in order to avoid a deep battery discharge - this would destroy the battery.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sygonix 1882082 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sygonix 1882082 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 0,34 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Sygonix 1882082

Sygonix 1882082 Gebruiksaanwijzing - Nederlands - 3 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info