738518
5
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
Preparation
Type labels in different languages are included in the package. Stick the language label in your
language over the German language label on the back of the weekly timer switch.
Getting Started, Use
Follow the safety instructions and the other information in this operation manual!
Plug the weekly switch timer into a regular earthed mains socket (wall socket).
Important!
Upon delivery, the internal NiMH battery securing the settings in case of power cut
(or when plugging the weekly switch timer) is empty.
The power supply for the LC display is buffered with the NiMH, which can result in
non-optimal display contrast after start-up. After about 30 minutes, the NiMH battery
should be charged to the extent that the display contrast has become normal.
The NiMH battery is fully charged after about 48 hours; when unplugging the weekly
switch timer from the mains voltage (e.g., during storage), the settings / program-
ming is maintained at full charge for about max. 6 months.
Setting the time
The weekly switch timer must be in the time display mode. Briey press the „MENU“ button
several times, until the desired time function appears.
Important!
Always set the winter time (even during summer). Summer time can then be acti-
vated by pressing the respective button, see next chapter „Switching between sum-
mer and winter time“.
Keep the „OK“ button pressed for about 4 seconds until the day of the week ashes on the
top of the display.
Set the weekday with the „+1“ or „-1“ button and then briey press the „OK“ button.
The hour display starts ashing; set the hours with the „+1“ or „-1“ button (keep the respective
button pressed down for quick setting).
Press the „OK“ button briey to conrm.
The minutes display starts ashing; set the minutes with the „+1“ or „-1“ button (keep the
respective button pressed down for quick setting). Every time when the minutes are set, the
seconds are simultaneously reset to „00“.
Press the „OK“ button briey to conrm and the day of the week starts ashing again.
Briey press the „MENU“ button to complete the setting mode.
Switching between summer and winter time
The weekly switch timer must be in the time display mode. Briey press the „MENU“ button
several times, until the desired time function appears.
Then press the „RCL“ button briey. This will switch between summer and winter time.
When summer time is activated, „+1h“ will appear at the bottom of the display.
Keep in mind that the switch on/off times are delayed when summer time is acti-
vated. That means that the device is switched on and off at the programmed times
(winter time) and not at the time displayed by the clock (summer time).
Programming of switching on/off times
In order to open the programming mode, briey press the „MENU“ button when the time is
displayed.
The rst switch on time of the rst programme group appears on the display, „PROG“ is shown
in the bottom left of the display and „1 ON“ ashes (switch on time for program group 1).
A programme group always consists of a switch-on time and a switch-off time, which
must be programmed one after another.
If you have only programmed a switch on time by accident, the connected device will
not be switched off until another programme group is activated.
Therefore, you should always program the switch on time rst and then the re-
spective switch off time (e.g., for programme group „1 ON“: Switch on at 07:00,
programme group „1 OFF“: Switch off at 08:00)
The number on the display shows the current programme group, „ON“ stands for switch on
time and „OFF“ for switch off time.
Use the „+1“ or „-1“ button to select one programme group after another and their respec-
tive switch on/off times. For a quick adjustment, hold the corresponding button for a longer
period of time.
1 ON <-> 1 OFF <-> 2 ON <-> 2 OFF........16 ON <-> 16 OFF <-> 1 ON <-> .....
When the programme group you want to set (e.g., programme group „3 ON“) is shown in the
bottom left of the display, briey press the „OK“ button.
The day of the week (or a combination of several days) for which the programme group is in-
tended now ashes in the top of the display. Select the desired combination (or an individual
day) using the „+1“ or „-1“ button. Quick adjustment is possible by keeping the respective
button „+1“ or „-1“ pressed for a longer period of time.
MO TU WE TH FR SA SU Each day of the week, Monday to Sunday
MO > TU > WE > TH > FR > SA > SU Individual day
MO WE FR Monday, Wednesday and Friday
TU TH SA Tuesday, Thursday, Saturday
SA SU Saturday, Sunday
MO TU WE Monday, Tuesday, Wednesday
TH FR SA Thursday, Friday, Saturday
MO TU WE TH FR Monday to Friday
MO TU WE TH FR SA Monday to Saturday
The short description (abbreviations of the weekdays in English) stand for the
following days: MO = Monday, TU = Tuesday, WE = Wednesday, TH = Thursday,
FR = Friday, SA = Saturday, SU = Sunday
Conrm the selection of the day of the week (or a combination of weekdays) by briey press-
ing the „OK“ button.
The hour display starts ashing; set the hours with the „+1“ or „-1“ button (keep the respective
button pressed down for quick setting).
Press the „OK“ button.
The minute display starts ashing; set the minutes with the „+1“ or „-1“ button (keep the
respective button pressed down for quick setting).
Press the „OK“ button.
Now, the programme group ashes again.
Press the „MENU“ button 2x briey to leave the programme mode and to return to
the time display.
Choosing the operating mode
In the time mode, the operating mode of the weekly switch timer can be selected. Briey
press the „MENU“ button several times, until the desired time function appears.
By pressing the „+1“ briey several times (and pressing the hand symbol), the desired operat-
ing mode can be selected.
The operating mode is shown at the bottom of the display.
„ON“ Socket/appliance switched on
„OFF“ Socket/appliance switched off
„AUTO ON“ Automatic operation is activated, the mains socket or the device remains
switched on until the switching program switches them off again
„AUTO OFF“ Automatic operation is activated, the mains socket or the device remains
switched off until the switching program switches them on again.
Deactivating/activating a programme group
You can temporarily deactivate a programme group you previously set, e.g., during holidays.
The settings will be kept but the switching programme is no longer executed.
With this function, different switching scenarios can be programmed and selected when desired
without having to re-programme.
Proceed as follows:
In order to open the programming mode, briey press the „MENU“ button when the time is
displayed.
The rst switch on time of the rst programme group appears on the display, „PROG“ is shown
in the bottom left of the display and „1 ON“ ashes (switch on time for program group 1).
Use the „+1“ or „-1“ button to select one program group after another and their respective
switch on/off times. For a quick adjustment, hold the corresponding button for a longer period
of time.
1 ON <-> 1 OFF <-> 2 ON <-> 2 OFF........16 ON <-> 16 OFF <-> 1 ON <-> .....
When the programme group you want to set (e.g., program group „5 ON“) is shown, briey
press the „RCL“ button.
The following appears on the display: „- - : - -“.
The switch on time or switch off time of the program group is deactivated and will not be car-
ried out (a programmed on/off time will not be deleted, however – only the execution of the
switching program is deactivated).
Use the „+1“ or „-1“ button to select one program group after another and their respective
switch on/off times.
Please note:
Always deactivated the switch off time (e.g., „5 ON“) as well as the switch off time
(„5 OFF“) of the respective programme group!
If a deactivated program group (indicator „- - : - -“) is to be re-activated, go to the program
mode as described above and select the desired program group using the „+1“ or „-1“ button.
Then press the „RCL“ button briey.
Where upon the indicator „- -: - -“ will disappear and the day of the week re-appears as well as
the time for the switch on and switch off time of the respective program group.
Press the „MENU“ button 2x briey to leave the programme mode and to return to
the time display.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Sygonix-1528595

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sygonix 1528595 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sygonix 1528595 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 0,19 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info