Charging the receiver battery
Charge the battery for about 3 hours before first use.
1 Switch off the receiver (position OFF).
2 Place the headset receiver on the transmitter.
3 The LED indicator on the transmitter will light up red when charging.
It will light up green in about 2 hours after the battery is fully
charged.
Connecting the transmitter
1 Connect the power adapter to the DC IN input socket located on the transmitter
rear panel.
2 Connect the power adapter provided to an electrical outlet.
3 Connect the transmitter to your audio source. RCA adapter cable and audio cable
are provided for various type of connection to your audio source (e.g. TV set, Hi-Fi
system, MP3 or iPod).
4 The green LED indicator will flash as soon as you have connected the power adapter
to the electrical outlet. As soon as an audio signal is detected, the LED lights up
constantly.