688153
116
Verklein
Vergroot
Pagina terug
1/124
Pagina verder
− Multiple Handsets
116
12.3 Conference calls
An external call can be transferred to another internal handset for a conference call. This enables
two handset users to confer with the external caller at the same time.
 HS 1: Establish a connection to the external subscriber
0,
2
HS 1: Connection is established to the other handset
HS 2: The internal call is taken
HS 1: Connects all calls to a joint conference
During a conference call, press the 0 button to put the external caller on hold. Press
the 0, buttons in succession to activate the conference facility again.
HS 1 or HS 2: Press the button to end the conference call.
12.4 Registering and deregistering handsets
12.4.1 Registering more DCT427 handsets
3 sec Initiate the registration facility by pressing the Paging
button on the base station
After pressing the Paging button, the handset registration process must be completed
within the following 90 seconds:
, or , Open the
Register
menu
or , Select the
Reg Base
function and confirm
, Enter the number of the base station (1 to 4) and confirm
the input
If the handset is already connected to a base station, the corresponding number flas-
hes.
A search is then made for the base station.
When the base station is found, proceed as follows:
, Enter the PIN (default setting: 0000) and confirm the input

The handset is then registered.
The handset is assigned an internal call number. The handset already registered has
the internal call number 1. The second handset registered is assigned the internal call
number 2. The internal call number appears in the right of the display when in Standby
mode.
12.4.2 Registering DECT−GAP handsets from other manufacturers
In order to register a DECT−GAP handset from another manufacturer, follow the instructions in the
operating manual provided by the original manufacturer and then press the Paging button
on your base station for 3 seconds. Use the PIN to register (default setting: 0000).
12.4.3 Deregistering handsets
A handset can only be deregistered by another handset still registered. It is not possible to com-
plete the deregistration using the handset which is to be deregistered.
, or , Open the
Setup
menu.
or , Select the
Del Handset
menu and confirm.
, Enter the PIN (default setting: 0000) and confirm the input

Press the button to cancel the process.
, Enter the internal call number of the handset to be
deregistered and confirm the input. 
116

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Switel DCT427 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Switel DCT427 in de taal/talen: Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 1,02 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info