20
2. PRESS the center button and hold in for 2 seconds. A flashing Mode Indicator over
the text LOG indicates the start of the recording.
To stop the recording:
1. If the Mode Indicator does not point at the text LOG, PRESS the [+] or [-] -buttons
until the Mode Indicator points directly at the text LOG.
2. PRESS the center button once. Text "StOP" appears in Field 4.
3. PRESS the center button and hold in for 2 seconds to validate the stopping of the
recording.
4.2. READING THE ALTIMETER MEMORY
The information stored in the memory contains a total of 6 displays. And additionally
up to the 20 altitude points you may have stored in the memory. The displays can be
scrolled through in two directions.
1. PRESS the Center button once to begin viewing the Altimeter memory.
The display shows the Start or Stop the logbook mode. If the logbook is not recording,
the display will show the text "LOG Start". If the logbook is recording, the display will
show the text "LOG Stop". PRESS and HOLD the Center button in for 2 seconds
accepting "LOG Start" or the "LOG Stop" display and exit.
2. PRESS [-] or [+] button to move from one memory mode to another to view data
stored in the memory:
a) PRESS the [-] button once to scroll altitude points stored in the memory (max.
20 points). The display shows the altitude points chronologically starting from
the latest (e.g. P18, P17, P16, etc.), the recorded altitude as well as the date
and time of the recording.
b) PRESS the [+] button once to view summarized information stored in the
memory during a log. You can view the information in the following order:
