2 ABOUT SUUNTO CADENCE POD
2.1 INTRODUCTION
Suunto Cadence POD is an accessory for Suunto t3c, t4c or t6c. This
light-weight, wireless device measures pedalling cadence, allowing you
to follow and optimize your cycling speed with your pedalling rate. It can
be used together with Suunto Bike PODs.
2.2 INSTRUCTIONS
See preceding illustrations.
1. Pair your device.
Insert the battery backwards into the POD to reset it. Before
re-installing the battery, enter the PAIR A POD setting in your Suunto
heart rate monitor and select the POD type.
2. Install crank magnet and cadence sensor.
3. Install or replace battery.
Avoid using excessive force. Perform in a dry place.
NOTE: If pairing fails, make sure there are no active ANT transmitters
nearby, such as heart rate transmitter belts, then remove the POD battery and
repeat steps 1.2-1.3.
2.3 MAINTENANCE
●
Avoid subjecting components to high-pressure water jets.
●
Avoid using solvents and oil-based products. When washing, use
lukewarm water, with soap if necessary. Wipe clean with a dry cloth.
●
Do not leave sensor exposed to sunlight when not in use.
●
Disassembling any component voids the guarantee.
●
Cycling can be physically demanding and presents certain risks.
Use your road sense and keep an eye out for traffic. Remember to
wear a helmet.
●
Product characteristics, shape and general presentation are subject
to modification without prior warning.
2.4 TECHNICAL SPECIFICATIONS
2.4.1 Technical data
●
Transmission 2.465 GHz ANT compatible
●
Transmission range up to 10 m / 30 ft
●
Operating temperature -20°C to +60°C / -5°F to +140°F
●
User replaceable battery 3V CR2032
●
Battery life up to 300 h (at 20°C / 68°F)
2.4.2 Trademark
Suunto and its product names, trade names, trademarks and service marks
whether registered or unregistered are protected by Suunto or respective
third party owners. All rights reserved.
2.4.3 Copyright
Copyright © Suunto Oy 2007. All rights reserved. This document and its
contents are proprietary to Suunto Oy and are intended solely for the use
of its clients to obtain knowledge and information regarding the operation
of Suunto products. Its contents shall not be used or distributed for any
5
en
