488891
19
Verklein
Vergroot
Pagina terug
1/178
Pagina verder
[F2]Language
Select the display language and a corresponding keyboard layout for the installa-
tion. The default language is English (US).
[F3]Video Mode
Select various graphical display modes for the installation. Select Text Mode if
the graphical installation causes problems.
[F4]Source
Normally, the installation is performed from the inserted installation medium.
Here, select other sources, like FTP or NFS servers. If the installation is deployed
on a network with an SLP server, select an installation source available on the
server with this option. Find information about SLP in Chapter 22, SLP Services
in the Network (↑Reference).
[F5]Kernel
If you encounter problems with the regular installation, this menu oers to disable
a few potentially problematic functions. If your hardware does not support ACPI
(advanced conguration and power interface) select No ACPI to install without
ACPI support. No local APIC disables support for APIC (Advanced Programmable
Interrupt Controllers) which may cause problems with some hardware. Safe Set-
tings boots the system with the DMA mode (for CD/DVD-ROM drives) and power
management functions disabled.
If you are not sure, try the following options rst: Installation—ACPI Disabled or
Installation—Safe Settings. Experts can also use the command line (Boot Options)
to enter or change kernel parameters.
[F6]Driver
Press this key to notify the system that you have an optional driver update for
openSUSE. With File or URL, load drivers directly before the installation starts. If
you select Yes, you are prompted to insert the update disk at the appropriate
point in the installation process.
[F7]Arch
If you install from an installation medium supporting 32bit and 64bit architectures
and have a processor with 64-bit support, select whether to install a 64-bit or 32-
bit system. By default, a 64-bit system is installed on a computer with 64-bit
support. To install a 32-bit system, press [F7] then select 32bit.
TIP: Using IPv6 during the Installation
By default you can only assign IPv4 network addresses to your machine. To enable
IPv6 during installation, enter one of the following parameters at the bootprompt:
ipv6=1 (accept IPv4 and IPv6) or ipv6only=1 (accept IPv6 only).
After starting the installation, openSUSE loads and congures a minimal Linux system
to run the installation procedure. To view the boot messages and copyright notices
during this process, press [Esc]. On completion of this process, the YaST installation
program starts and displays the graphical installer.
Installation with YaST 9
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Suse openSUSE 11.3 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Suse openSUSE 11.3 in de taal/talen: Engels als bijlage per email.

De handleiding is 7 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info