Easy SET-UP to operate your TUNER
The set-up to operate your TUNER is similar to the set-up procedures for your CD-Player. Follow
the steps 1. until step 10. by using the TUNER/ key on your RC 8 and reading the word
TUNER replacing the word CD-PLAYER.
Easy SET-UP to operate your TAPE RECORDER
The set-up to operate your TAPE RECORDER is similar to the set-up procedures for your CD-
Player. Follow the steps 1. until step 10. by using the TAPE/ key on your RC 8 and reading
the word TAPE RECORDER replacing the word CD-PLAYER.
Easy programming for the control of your AMPLIFIER
To programme the remote control to operate your AMPLIFIER, proceed as described for the CD
PLAYER. Complete steps 1 to 10 using the AMP/ key on your RC 8. For CD PLAYER, sim-
ply read AMPLIFIER.
Search Method
If the Easy Set-Up procedure was not successfully, try the Automatic Search Method on your RC 8
remote control:
A. Make sure that 2 new batteries have been inserted correctly (see step 1. of the Easy Set-Up).
B. Switch on your TELEVISION.
C. Press the key on your RC 8 (for about 5 seconds) until the LED flashes twice.
D. Enter code with the number keys of your RC 8.The LED flashes twice.
E. Press the key on your RC 8 until your TV SET is switched off.This might take up to
15 minutes. (During a code scan for VCR, DVD, CD or TAPE, press and hold the key;
during a TUNER scan, press and hold key ).
F. Now press the key on your RC 8 again until the LED flashes twice.
G. If your TELEVISION operates incorrectly, repeat step B. to step F.A new code search begins
with the last code number found in the previous search. Please be patient.There may be many
codes to search through before the code for your device is found.
Code scan for VCR, SAT, DVD, CD,TAPE,TUNER and AMP
To complete a code scan for VCR, SAT, DVD, CD,TAPE,TUNER or AMP, proceed as described for
a TV code scan. Complete steps A to G and press keys , , , /SHIFT+ CD/ ,
/SHIFT + TAPE/ , /SHIFT + TUNER/ or /SHIFT + AMP/ for
the respective device.
At step E,
for SAT and AMP, press the key;
for VCR, DVD, CD and TAPE, press the key, and
for TUNER, press key
Special Functions of your RC 8:
Brightness / colour / contrast / etc.
Adjusting brightness / colour / contrast / bass / treble / balance of your television with your RC 8
remote control:
1. Make sure your RC 8 is in the TV-mode (Press ).
2. Press /SHIFT.
3. Press within 5 seconds: brightness. colour.
contrast. treble.
bass. balance.
4. Use the and to adjust the settings of your television.
5. After 5 seconds your RC 8 will return to the normal functions to operate the channel selection.
OK key on your RC 8
• TV-Mode Resets your TELEVISION to the basic settings.
• TV-Mode/menu Confirmation key.
• VCR-Mode Recording key (press twice).
• SAT-Mode Confirmation key.
• DVD level Confirmation key for settings
• TAPE-Mode Recording key (press twice).
Make a note of the 3-digits codes of your devices for future reference, because you
will need these codes to set-up your RC 8 remote control again after replacing the
batteries):
SAT
VCR
VCR
VCR
0 0 1
1 2
3 4
5 6
■
■
TV
TV
TV
2
2
TV
DVD
DVD
DVD
SAT
SAT
