736537
36
Verklein
Vergroot
Pagina terug
1/45
Pagina verder
1
UNIVERSAL
FERNBEDIENUNG
8
1
in
D
GB
F
I
NL
E
2
3
(SET) und die Gerätetaste (z.B. TV) und
halten Sie diese 3 Sekunden gedrückt.
3. Das AUS- Signal wird automatisch an
das gesuchte Gerät übermittelt. Wenn das
gesuchte Gerät (TV) sich aus schaltet,
drücken Sie sofort die Gerätetaste (TV),
um den gefundenen Code zu speichern.
4. Schalten Sie das Gerät durch drücken der
EIN- Taste” oder „1- Taste” erneut ein.
Überprüfen Sie die Funktion der anderen
Tasten auf der Fernbedienung. Sollten
nicht alle Tasten funktionieren, können Sie
den Suchlauf erneut starten ( siehe Punkt
2 3 ), um einen passenderen Code zu
ermitteln.
Hinweis:
Um den Suchlauf abzubrechen, drücken Sie
eine beliebige Taste oder die Gerätetaste.
Das Licht der LED- Lampe erlischt und
der Suchlauf wird beendet. Sie können den
Suchlauf jederzeit neu starten.
C. Einstellung durch manuellen Such-
lauf:
Sollte die Einstellung mit den Markencodes
erfolglos sein, können Sie auch die Funktion
„Manuelle Suche“ verwenden, um den
korrekten Code für Ihr Gerät zu ermitteln.
1. Schalten Sie das Gerät, dass Sie bedienen
möchten „EIN”. Sollte es sich um einen
Videorecorder handeln, legen Sie bitte eine
Videokassette ein.
2. Richten Sie die Fernbedienung auf Ihr
Gerät. Drücken und halten Sie die Taste
SET und betätigen Sie dann kurz die
Gerätetaste (TV).
3. Die LED- Lampe der Gerätetaste schaltet
sich dauerhaft ein und die Fernbedienung
bendet sich nun im Einstellmodus.
4. Betätigen Sie die POWER- Taste (EIN
AUS –Taste). Handelt es sich bei dem
gesuchten Gerät um einen Videorekorder,
DVD- Player oder CD- Player, drücken Sie
bitte die gelbe PLAY- Taste.
5. Die LED- Gerätetaste blinkt nun, um den
Modus manuelle Suche anzuzeigen.
6. Testen Sie die Funktionen der einzelnen
Tasten. Sollten diese nicht funktionieren,
drücken Sie erneut die POWER- Taste um
den nächsten Code aufzurufen. Testen Sie
auch hier die Funktion der einzelnen Tasten
und speichern Sie den Code durch drücken
der Gerätetaste (TV).
Sollte sich das gesuchte Gerät ausschalten,
drücken Sie die Gerätetaste (TV) um den
Suchlauf zu beenden und den gefundenen
Code zu speichern. Schalten Sie das
gesuchte Gerät (TV) mit der POWER-
Taste (EIN-AUS-Taste) oder durch drücken
der Taste 1 erneut an. Testen Sie auch hier
die Funktionen der anderen Tasten. Sollten
hier nicht alle Tasten funktionieren, können
Sie den Suchlauf ( siehe Punkt 2 ) erneut
starten.
Hinweis: Handelt es sich bei dem gesuchten
Gerät um einen Videorekorder/CD- Player/
DVD- Player , wird beim gefundenen Code
der „Abspielbetrieb“ gestartet. Drücken
Sie nach einsetzen des Abspielbetriebes
dann die Geräte-Taste (VCR, CD, DVD)
um den gefundenen Code zu speichern.
Überprüfen Sie nun die Funktionen der
Gerätetasten Ihrer Fernbedienung.
Sollte eine Taste nicht ordnungsgemäß
funktionieren, wiederholen Sie die Schritte
1 7, bis die Tastenbelegung korrekt
funktioniert.
Um den manuellen Suchlauf abzubrechen,
drücken Sie eine beliebige Taste oder die
Gerätetaste. Das Licht der LED Lampe
erlischt und der Suchlauf wird beendet. Der
Suchlauf wird automatisch beendet, wenn
innerhalb von 10 Sekunden keine Eingabe
erfolgt.
D. Anzeige des Gerätemarkencodes
Der Gerätecode, der in Ihrer Fernbedienung
gespeichert wurde, kann wie folgt abgerufen
werden:
1. Drücken Sie die Taste SET und halten
Sie diese gedrückt. Betätigen Sie die
Zahlentaste 1, um sich den 3- stelligen
Code der 100 er Stelle anzeigen zu
lassen. Zählen Sie mit, wie oft die LED
blinkt. Blinkt die LED nicht, ist die Ziffer
NULL. Beispiel für Code 028:
2. Drücken Sie SET und „1“
LED blinkt 0 – mal.
3. Drücken Sie SET und „2“
TV DVD SAT VCR TUNER CD TAPE AUX
Ihre persönlichen Gerätemarkencodes
2
3
LED blinkt 2 – mal.
4. Drücken Sie SET und „3“
LED blinkt 8 – mal.
E. Reset / Löschfunktion:
Um die eingegebenen Codes der Fernbedienung
zu löschen zu löschen, drücken und halten Sie
die SET -Taste. Drücken Sie dann die Taste
„NULL“ länger als 3 Sekunden. Die LED wird
2- mal blinken und alle gespeicherten Codes der
Fernbedienung sind gelöscht.
F. Schreibschutz der Geräte- Codes:
Um die Geräte Codes gegen versehentliches
Überschreiben / Löschen zu schützen, gehen
Sie wie folgt vor:
1. Drücken Sie die Gerätegruppen- Taste
( TV ), drücken und halten Sie die SET
Taste und drücken Sie die Taste „7“ auf
dem Ziffernblock. Lassen Sie dann beide
Tasten los, die LED blinkt 2- mal und
der Code ist gegen ein Überschreiben /
Löschen gesichert.
2. Um den Schreibschutz aufzuheben,
drücken Sie die SET Taste und halten
diese gedrückt, betätigen Sie nun die Taste
„8“, die LED blinkt 2- mal und der Schutz
ist aufgehoben.
G. Bildschirm-Menüsteuerung
Ihre neue Fernbedienung ist so vorprogram-
miert, dass sie das Menü Ihrer Geräte (TV,
VCR, DVD, SAT) steuert, sofern Ihre Geräte
mit einer entsprechenden Bildschirm-Menü-
funktion ausgestattet sind. Drücken Sie die
Taste [MENU] auf der Fernbedienung. Das
Menü wird aufgerufen. Mit den Cursortasten
können Sie durch das Menü blättern. Mit der
Taste [OK] wird das Menü bestätigt.
H: Farbe/Helligkeit, Bässe/Höhen usw.
Farbe/Helligkeit, Bässe und Höhen Ihres Fern-
sehgeräts lassen sich über die Bildschirm-Me-
nüsteuerung (siehe oben) einstellen.
Kundendienst und Garantie
Ihre neue Fernbedienung ist so vorprogram-
miert, dass sie alle Grundfunktionen der Ori-
ginal-Fernbedienung übernehmen kann. Das
bedeutet, dass die Einstellung neuer Kanäle an
Ihrem Fernsehgerät nur über die Bildschirm-
Menüfunktion möglich ist (sofern diese Funkti-
on an Ihrem Fernsehgerät zur Verfügung steht).
Bei Kundendienstfragen und Garantieansprü-
chen wenden Sie sich bitte an folgende
Service Adresse:
European Distribution Centre
Londoner Strasse 11
D-48455 Gildehaus
Germany
E-Mail:
Info@SupportPlus.org
Tel. nat./internat.:
00800 77 77 88 99
Gerätemarkencode-Liste
Die Gerätemarkencode-Liste ndet sich im hin-
teren Teil dieser Bedienungsanleitung.
TV DVD SAT VCR TUNER CD TAPE AUX
Ihre persönlichen Gerätemarkencodes
4
5
SET Taste um den SETUP/ Eingabe- Modus zu starten
TV
VCR
CBL/SAT
CD
DVD
TUNER
TAPE
AUX
Schaltet die gewünschten Geräte ein bzw. aus
0-9 Nummerntasten für Eingabe von Gerätecodes bzw. Programmtasten für TV
Enter -Taste arbeitet wie auf der Original FB zum Bestätigen von Befehlen.
A·B Arbeitet wie die Taste TV/Video auf der Orig. FB und schaltet zwischen
TV & Videomode um
MENU Ruft das Bildschirm Menü des TV auf
CH Schaltet die Programme / Kanäle auf bzw. ab
VOL
MUTE
REW schneller Rücklauf
PLAY Start Taste für Video, CD, DVD
FFWD schneller Vorlauf
REC Aufnahme-Taste
STOP Stop Taste
PAUSE Pausen Taste unterbricht den Betrieb „Play“
OK
EXIT
ROT
GRÜN
GELB
BLAU
Tasten der Geräte die Sie bedienen / steuern möchten
Tasten zur Lautstärke-Regelung und Ton aus Taste.
Cursor Tasten um im MENÜ die Cursor zu bewegen und
zu bestätigen , bzw das Menü zu verlassen
Schnellzugriff für Videotext
4
5
Operating Instructions for the 8 in 1 Universal Remote
Control Unit
Thank you for purchasing your new 8 in 1 Universal Remote Control Unit.
Your new remote control unit contains one of the largest infrared code library for the control of a
maximum of 8 different devices obtainable in Europe.
This remote control unit is preprogrammed, in other words all you have to do is enter into it the
type of device (for example a TV from Sony) which you wish to control.
The 8 in 1 Universal Remote Control Unit is suitable for the control of practically all common
makes of Television Set (TV), DVD Players (DVD), (digital) Satellite Receivers (SAT), Video
Recorders (VCR), Tuners (Tuners), CD Players (CD), Cassette Recorders (TAPE), Ampliers
(AUX).
The 8 in 1Universal Remote Control Unit controls all the essential basic functions of your devices.
Please read these operating instructions before using your new 8 in 1 remote control unit.
Setting up procedure:
To make your remote control unit ready for use
you need to carry out the following steps:
A. Set-Up by brand codes:
1. Make sure that you have installed 2 new
batteries (type „AAA”) correctly into your
new remote control.
2. Turn on the device which you would like to
control (e.g. TV set).
3. In the back section of this manual you nd
the name of your device brand. Search for
the brand of the device you would like to
control and note the required codes (e.g.
PHILIPS TV you will nd 001, 004, 016,
etc). Remark: If the brand name of your
television is not listed in the device brand
code list, rst try the 3-digit codes, which
are listed under „Philips” TV.
4. Press and hold down the SET key and actu-
ate the device key (TV). The LED lamp of
the device key lights up and signals to you
the set-up mode. Release both keys.
5. Enter now the 3- digit device code (e.g.
001 for PHILIPS TV). If no entry is made
within 10 seconds, the set- up mode is au-
tomatically terminated.
6. The LED lamp will be turned off, if this
code is accepted by the remote control unit.
If the LED lamp ashes once, this code is
not accepted and the remote control unit is
still in set-up mode. In this case enter the
next code from the list.
7. Check the functionality of the keys. If
some keys on your new remote control unit
do not work correctly, try one of the other
3-digit device codes from the list. Repeat
steps 4. to 7. until all the basic functions
operate properly.
Remark: To leave set-up mode, press the
device key (TV). The set-up mode discon-
tinues automatically, if none of the keys
was pressed within 6 seconds.
B. Set-Up by auto search:
If set- up with brand name codes is unsuccess-
ful, you can use the „Automatic search” func-
tion to establish the correct code for operating
your device.
1. Turn ON the device you would like to con-
trol. If it is a video recorder insert a video
tape.
2. Point the remote control unit at your de-
vice. Press the SET and the device (e.g.
GB
6
7
TV) keys simultaneously and hold both
down for 3 seconds.
3. The LED- lamp starts ashing. The OFF
signal is automatically transmitted to the
device being searched for. If the device
(TV) switches itself off, immediately press
the device key (TV) to save the code which
has been found.
4. Turn on the device again by pressing the
„ON” key or the „1” key . Check the func-
tions of the keys on the remote control unit.
If some keys do not work correctly, you can
start the search run again (see Points 2 – 3)
to establish a suitable code.
Remark: To terminate the search run press
any key or the device key. The LED lamp
stops ashing and the search run is termi-
nated. You can start the search run again at
any time.
C. Set-Up by manual search:
If setting up with brand name codes is unsuc-
cessful, you can also use the „Manual Search”
to nd the correct code to operate your device.
1. Turn on the device you would like to con-
trol. If it is a video recorder ( VCR) insert a
video tape.
2. Point the remote control unit at your de-
vice. Press and hold the SET key. Press
simultaneously the device key, that you
would like to control ( TV ).
3. The LED- lamp of the device key will be
turned on, to inform you, that you are in the
set- up mode. Release both keys.
4. Press the POWER key (ON OFF key). If
it is a Video Recorder, DVD Player or CD
Player, please press the yellow PLAY key.
5. The LED-lamp keeps now ashing, to con-
rm the “Manual Search” mode.
6. Check the functionality of the keys, ( not
POWER – or PLAY KEY). If the keys
work properly, press the device key ( TV )
to conrm the correct code. If the keys do
not work properly, repeat step 2. to 6.
If the searched-for device switches itself
off, press the device key (TV) to terminate
the search run and to save the code which
has been found. Switch on the searched-for
device (TV) again with the POWER key
(ON OFF key) or by pressing the „1”
key. Here too you should test the functions
of the other keys. If not all keys function
here, you can restart the search run (see
Point 2).
Remark: If the device is a video recorder
/ CD player / DVD player the „play op-
eration” is started when the code is found.
When the play operation has started you
should press the device key (VCR, CD,
DVD), to save the code which has been
found.
Now check the functions of the device keys
on your remote control unit.
If most of the keys does not function prop-
erly repeat steps 1 – 7 until the key assign-
ments function correctly.
To abort the manual search run, press any
key or the device key. The LED lamp will
switched off and the search run terminated.
The search run is automatically terminated
if no entries are made within 10 seconds.
D. Display of device codes:
The device code, which has been saved in your
remote control unit, can be called up as fol-
lows:
1. Press the SET key and hold it down. Now
actuate number key 1 to display the 3-digit
code of the 100th position. Count how of-
ten the LED ashes. If the LED doesn’t
ash the digit is ZERO. Example for Code
028:
2. Press SET and „1”
LED ashes 0 – times.
3. Press SET and „2”
LED ashes 2 – times.
4. Press SET and „3”
LED ashes 8 – times.
E. Reset / delete function:
To delete the codes, which have been entered
in the remote control unit, press and hold down
6
7
TV DVD SAT VCR TUNER CD TAPE AUX
the SET key. Then press the „ZERO” key for
more than 3 seconds.
The LED will ash twice and then all the codes
saved in the remote control unit are deleted.
F. Write-protection of device codes:
To protect the device codes from being inad-
vertently overwritten / deleted, you should
carry out the following:
1. Press the device group key (TV), press and
hold down the SET key and press the „7”
key on the numerical block. Then release
the two keys, the LED will ash twice and
the code is then protected from being over-
written / deleted.
2. To cancel write protection, press the SET
key and hold it down, then activate the „8”
key , the LED ashes twice and the protec-
tion has been cancelled.
G. On Screen Menu Control
Your new remote control is preprogrammed
to operate the menu -only if your device is
equiped with such on screen menu function
of your devices (TV, VCR, DVD, SAT) Press
the [MENU] key on the remote control and the
menu comes on. The cursor keys enable you to
scroll the menu. The [OK] key is to conrm the
menu.
Write down the 3-digit codes needed to control your personal devices below:
H. Colour / brightness, Bass / Treble etc.
The colour / brightness, bass and treble of your
televisions can be changed via the on screen
menu control function (see above).
Service and warranty
Your new remote control is preprogrammed to
control all basic functions of the original remote
control. This means that the installation of new
channels to your television can only be operated
via the on-screen-menu function (if available at
your television).
For service and warranty claims, please con-
tact:
Service Center:
European Distribution Centre
Londoner Strasse 11
D-48455 Gildehaus
Germany
E-Mail:
Info@SupportPlus.org
Tel. nat./internat.:
00800 77 77 88 99
Device Brand Code List
The Device Brand Code List is printed in the
back of this user`s manual.
34
35
Aston 164
Astra 003,021,030,031,032,033,034,093,196
Astro 009,011,029,040,041,042
Audioton 009,055
Aura 034
Austar 092,193,212
Axis 017,029,033,050
Barcom 025,196
Beko 204
Best 025,029,214
Blaupunkt 040
Boca 021,093
Brain Wave 044
Brandt 136,137,138,145
Broadcast 043
Brunor 126
Bskyb 154
Bt Cable 240
BT Satellite 003,022,145
Bush 005,006,012,045,102,133,195,205,206
Cabletime 241,242,243,244
Cambridge 003,046
Camundosat 047
Canal Satellite 203,222
Canal+ 140,174,222
Channel master 007
Chaparral 098
Citycom 005,052
Clatronic 044
Clemens Kamphus 015,083
Clyde Cablevision 245
CNT 011
Columbus 069
Commlink 010
Comtech 050,051
Condor 029
Connexions 039,047,048
Conrad 197
Contec 050,052
Cosat 055
Crown 021
Cryptovision 204 246
D Box-Df1 135,227,230
Daeryung 039
Dansat 012,014,205,206
D-Box 194,198
DDC 007
Decca 053
Delega 007
Delfa 193
DEW 050
Diamond 054
Diskxpress 025,048
Ditristrad 055
DNT 039,125
Dong Woo 092
Drake 056,128
Dynasat 031
Echostar 026,039,057,058,060,073,149,150,151,156,203,232
EEC 015
Einhell 004,010,015,019,021
Elekta 011
Elrad 226
Elta 004,008,029,055,125
Emanon 004
Emme Esse 029,031,045,083,195,223
Ep Sat 005,204
Eurocrypt 196,204
Eurodec 062,063
Europa 022,193
Eurosat 021
Eurosky 021,029,031
Eurospace 061
Eurostar 008,021,080
Exator 003,004,009
Ferguson 005,012,014,045,062,064,065,066,195,204,205,206,207
Fidelity 017,019
Filmnet 226
Filmnet Cablecrypt 247
Filmnet Comcrypt 247
Finlandia 005,196,204
Finlux 003,005,030,067,072,079,196,197,204
Finnsat 050,062
Force 148
Foxtel 211,212
Fracarro 133,223
France Satellite/TV 069
France Telecom 225
Freecom 004,068
FTE 022,024,051,087
Fuba
004,025,029,032,039,040,069,072,122,125,196,197,
199,214
Galaxi 025
Galaxis 010,029,033,050,055,070,076,152,153,192,193,203,234
GEC 245
GMI 021
Goldbox 203
Goldbox-D+ 222,233
Goldstar 068
Gooding 075
Goodmans 005,074,204
Granada 030,196
Grothusen 004,068
Grundig 005,009,040,045,075,077,086,124,154,195 017,075
G-Sat 014,015,206
Hanseatic 095
Hantor 004,044,092
36

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw SupportPlus URC-81 L - 8 in 1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van SupportPlus URC-81 L - 8 in 1 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 0,95 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info