USER MANUAL
GB
RC 7 - UNIVERSAL REMOTE CONTROL
Thank you for buying your new RC 7 remote control.Your RC 7 remote control needs 2 new ”AAA”
batteries (not included in this packaging) and can operate 7 devices: a television, video recorder, satellite
receiver or cable box, cd-player, tuner, tape recorder and an amplifier.
Easy SET-UP to operate your TELEVISION
1. Insert 2 new alkaline 1.5V batteries AAA/LR03 into the back of your RC 7; Follow the markings in the
battery compartment.
2. Switch on your TELEVISION.
3. Look for the brand name of your TELEVISION (e.g. Sony) on the attached list with codes.
4. Next to the brand name you will find one or more 3-digit code numbers which have to be entered
into your RC 7 remote control.
5. Press the key on your RC 7 (for about 5 seconds) until the LED flashes twice.
6. Enter the first 3-digit code from the list (e.g. for Sony) with the number keys on
your RC 7.
7. The LED will blink twice to indicate that the code has been accepted.
8. Aim your RC 7 at your TELEVISION and press the key.Your RC 7 is set up correctly if
your TELEVISION switches off.
9. If your TELEVISION does not react and/or it operates incorrectly, repeat step 3. to step 8. by entering
the next 3-digit code from the list.
10. If none of the 3-digits codes of this form operates your TELEVISION properly, use the ”Search
Method” of your RC 7 remote control.
Easy SET-UP to operate your VIDEO RECORDER
The set-up to operate your VIDEO RECORDER is simular to the set-up procedures for your television
set. Follow the steps 1. until step 10. by using the key on your RC 7 and reading the word VIDEO
RECORDER replacing the word TELEVISION.
Easy SET-UP to operate your SATELLITE RECEIVER
The set-up to operate your SATELLITE RECEIVER or CABLE BOX is simular to the set-up procedures
for your television set. Follow the steps 1. until step 10. by using the key on your RC 7 and reading
the word SATELLITE RECEIVER / CABLE BOX replacing the word TELEVISION.
Easy SET-UP to operate your CD-PLAYER
The set-up to operate your CD-PLAYER is almost simular to the set-up procedures for your television set:
1. Insert 2 new alkaline 1.5V batteries AAA/LR03 into the back of your RC 7; Follow the markings in the
battery compartment.
2. Switch on your CD-PLAYER.
3. Look for the brand name of your CD-PLAYER (e.g. Sony) on the attached list with codes.
4. Next to the brand name you will find one or more 3-digit code numbers which have to be entered
into your RC 7 remote control.
5. Press the key on your RC 7
6. Press the CD/ key (for about 5 seconds) until the LED flashes twice.
7. Enter the first 3-digit code from the list (e.g. for Sony) with the number keys on
your RC 7.
8. The LED will blink twice to indicate that the code has been accepted.
9. Aim your RC 7 at your CD-PLAYER and press the key.Your RC 7 is set up correctly if
your CD-PLAYER switches off.
10. If your CD-PLAYER does not react and/or it operates incorrectly, repeat step 3. to step 9. by ente-
ring the next 3-digit code from the list.
11. If none of the 3-digits codes of this form operates your CD-PLAYER properly, use the ”Search
Method” of your RC 7 remote control.
Easy SET-UP to operate your TUNER
The set-up to operate your TUNER is simular to the set-up procedures for your CD-Player. Follow the
steps 1. until step 10. by using the TUNER/ key on your RC 7 and reading the word TUNER
replacing the word CD-PLAYER.
Easy SET-UP to operate your TAPE RECORDER
The set-up to operate your TAPE RECORDER is simular to the set-up procedures for your CD-Player.
Follow the steps 1. until step 10. by using the TAPE/ key on your RC 7 and reading the word
TAPE RECORDER replacing the word CD-PLAYER.
TV
3 0 8
8 4 2
AUD
SAT
VCR
TV
SAT
VCR
