20
7. Long press the selected device key (e.g. TV) for 3 seconds (LED light comes off) to leave learning mode while finishing.
Note:
- When no action is taken in the learning mode for more than 30 seconds, RKM-520 will be disengaged automatically.
- Long press the selected device key for 3 seconds is to disengage the learning mode anytime.
- The learning key codes will replace all the key codes downloaded from the Internet and vise versa.
- When having learned the key codes from your original remote controls to the RKM-520, you can upload the key codes from RKM-520 to the
Internet data server as backup key codes for RKM-520 and also share the codes with other users.
- When in the downloading the remote control code UI page and select “Default Setting”, all the learned key codes will be erased.
Increase the learning rate:
- During the learning stage, the IR LED from the original remote control and RKM-520 transmitting/learning port must be toward each other in
(LOS) line-of-sight between 3 and 5 cm range and hold both remote controls steady. Turn on the digital camera and press any key simultaneously
on the remote control, the display on your digital camera will detect the location by visualizing the flashing of IR LED from the remote control.
- During the learning stage, the key pressed from the original remote control must be pressed and stay pressed until the key code is learned,
otherwise, the key code learned from RKM-520 might be incomplete.
