Principle of air washing
1. The quiet and energy-saving fan draws the contaminated air in from above.
2. The air sweeps over the humidifier disks (the windscreen fluid filter), which rotate constantly in the water
bath, and collects moisture.
3. The water acts as a natural filter and cleans the entrained air of dust. The additional “Bio Silver Stone”
filter kills germs and bacteria in the water.
4. The washed air, enriched with water, flows back out through the side openings.
5. The ioniser function enriches the room air with anions and in doing so enhances well-being.
Operation
• Components:
1: Control panel with LED display 7: Drum wheel
2: Air outlet 8: Windscreen fluid filter
3: Handle 9: Max. water level mark
4: Air purifier lid 10: Water level meter
5: Power plug with cord 11: Drum wheel holder
6: Air inlet 12: Water container
• Operating voltage: 220-240V~, 50/60Hz, 15W
• It is recommended to operate the appliance at a room temperature between 5°C and 40°C as well as at
a relative humidity level below 80%. If the outside temperature is below 0°C, let the appliance warm up
at room temperature for one hour.
• Only use the lid handles to open the lid. If you wish to move the appliance, hold it with both hands from
beneath.
• Water container:
o Please make sure that the appliance is not connected to the power outlet yet. Lift the air purifier
lid up so the water container is accessible.
o Please put the Bio Silver Stone Filter into the designated holder, see picture. The filter should
be changed once a year.
Max. water level mark
Holder for Bio Silver Stone Filter
Front side of the appliance
Bio Silver Stone Filter
