Cleaning
• The unit should be cleaned after each use. Please remove the unit from the power supply and let it cool
down before cleaning. To avoid electric shock, never immerse the appliance and its electrical
components under water.
• Please use a damp, soft cloth to clean the outer surfaces and a dry cloth to dry them.
• Please clean the container, hopper, safety cover for the flat burr grinder and the two lids with warm water
and some detergent. The container, hopper and the two lids can be cleaned in the dishwasher
alternatively. For removal from the device, pull the container out and turn the hopper and the safety
cover for the flat burr grinder clockwise, then lift them up.
• Please dry all parts completely with a soft cloth and then put them back into the unit. To do this, slide
the container back in until the stop and turn the hopper counterclockwise until it locks into place. The
safety cover for the flat burr grinder is fixed in place when it moves the knob for grinding level setting
while being turned counterclockwise.
• Please do not use any aggressive or chemical cleaning agents or abrasive cleaning agents such as
steel wool.
In case of complaint
• You can claim the device within 24 months from date of purchase (receipt).
• A free replacement or repair will be excluded from prior improper product handling.
• Defects in wear parts, consumables, as well as cleaning, maintenance or replacement of said parts are
therefore with costs.
• If you want to make a complaint, please bring the entire device in its original packaging and with proof of
purchase to your dealer. For a timely and convenient service register, visit our website www.suntec-
wellness.de and learn more.
• Without a proof of purchase, generally there will be no repair or replacement.
• In the event that the complaint case is analogous to our terms of service, all defects of the device or its
accessories due to material or manufacturing defects will be eliminated by repair or, at our discretion,
replacing the unit.
• The damage of accessories does not automatically lead to a free exchange of the whole device. In these
cases, please contact your dealer. Glass breakage, or breakage of plastic parts are always to charge.
• The dealer or repair service can perform the repair after the expiration of warranty against charge.
Note concerning protection of environment
This product must not be disposed of via normal household waste after its service life, but must be
taken to a collection station for the recycling of electrical and electronic devices. The symbol on the
product, the operating instructions or the packaging indicates such disposal procedures. The
materials are recyclable in accordance with their respective symbols. By means of re-use, material
recycling or any other form of recycling old appliances you are making an important contribution to
the protection of our environment.
Please ask your local council where your nearest disposal station is located.
As part of our extended producer responsibility, this product is indicated in accordance to the European Directive
2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). The aim is to avoid, reduce, and
environmentally friendly disposal of electronic waste. Please help actively to protect the environment and
dispose electronic waste through local collection points. The packaging and this manual can be recycled.
EC declaration of conformity
The device meets the essential health and safety requirements of the European Union. The EC declaration of
conformity is the basis for CE marking this unit.
With publication of this manual supersedes all previous their validity. SUNTEC, SUNTEC Wellness,
KLIMATRONIC and the Sun-Logo are registered trademarks. © 2021 SUNTEC WELLNESS GMBH
Liability is excluded for all printing errors and omissions.
© 2021 Suntec Wellness® KML-8540 design pro
SUNTEC WELLNESS GMBH / HOLZSTRASSE 2 / 40 221 DÜSSELDORF / GERMANY
