654315
36
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
34
Advanced programming options
Espresso Thermoblock Temperature
The water temperature of this espresso
machine has been calibrated to the precise
temperature of 92°C at the group head. The
temperature of the water at the group head
can be modified in increments of 2°C up and
down should it be desired.
To do this you need to follow the instructions
below:
1. Insert the power cord into a 230-240V AC
power outlet and switch the power ‘ON’.
Note: Although the espresso machine is ON
at the power outlet ensure that the actual
espresso machine power is ‘OFF’. Therefore
no lights will be illuminated on the espresso
machine control panel.
2. Press and hold down the
single
espresso’ button.
3. While still holding down the
single
espresso’ button briefly press the ‘POWER’
button and release.
Note: This activates the programmability of
the Espresso Thermoblock Temperature and
to signal this, the light above the
single
espresso’ button will illuminate, which is the
factory setting.
4. Release the
single espresso’ button.
Note: The light above the single espresso’
button will remain on and then if you have
already re-programmed the temperature of
the espresso thermoblock the position of the
light will move to one of the other 4 settings
indicating the current temperature setting.
Note: This light will remain on for up to 5
seconds before automatically returning to
the Factory Setting if no action is taken. The
espresso machine will then power on and
begin heating up.
5. Within 5 seconds press and release one
of the buttons below depending on the
required temperature adjustment;
+2°C = Press the
double cup’ button
+4°C = Press the ‘PROGRAM’ button
-2°C = Press the ‘MANUALbutton
-4°C = Press the ‘POWER’ button
Note: When you have selected a new
temperature setting the light above the
button pressed will illuminate and to indicate
that the setting has been changed correctly
the light will flash and 2 beeps will sound.
Note: The espresso machine will then
automatically power on and begin heating up.
Remember: If you do not select a new
temperature setting within 5 seconds the
program will return to the Factory Setting and
the espresso machine will then power on and
begin heating up.
-4°C -2°C
Factory
Setting
+2°C +4°C
36

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sunbeam EM6910 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sunbeam EM6910 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,93 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info