704206
44
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
80-0067-00-MO-RevJ 2019-01-30 SunTech CT40 User Manual | 44
Why is no heart rate data showing on the display?
If the device is configured to use the Sp02 sensor as the pulse rate source, and the sensor is not attached to the
patient, there will not be heart rate data on the display. Only dashes will appear, or MAP results if MAP measurement
is enabled. Note that MAP is not available in the United States.
How many measurements can be stored in the SunTech CT40 memory?
The SunTech CT40 can store 99 unique sets of measurements. After the 99th measurement has been saved, the next
measurement will have the Memory Location Identifier label “01” and will overwrite the most recent measurement
(measurement 99). After all results are cleared from the memory, the Memory Location Identifier also will return to
“01.”
14. Technical Information
EMC Statement
This equipment needs special precautions regarding EMC and needs to be installed and put into service according to
the EMC information provided in this document. This equipment has been tested and found to comply with the limits for
medical devices to IEC60601-1-2: 2014. These limits are designed to provide reasonable protection against harmful interference
in a typical medical installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to other devices in the vicinity. However, there is no
guarantee that interference will not occur in a particular installation. When the device accuracy of any value displayed on the
monitor is questionable, determine the patient’s vital signs by alternative means. If it is determined that the device is
malfunctioning, stop using the device and have the device checked by a qualified service technician before further use. If this
equipment does cause harmful interference to other devices, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving device.
Increase the separation between the equipment.
Connect the equipment into an outlet on a circuit different from which the other device(s) are connected.
Consult the manufacturer or field service technician for help.
Portable and mobile RF communications equipment can affect Medical Electrical Equipment.
WARNING: Portable RF communications equipment (including peripherals such as antenna cables and external
antennas) should be used no closer than 30 cm (12 inches) to any part of the CT40 system, including cables
specified by the manufacturer. Otherwise, degradation of the performance of this equipment could result.
WARNING: Use of accessories, transducers, and cables other than those specified may result in increased emissions
or decreased immunity of the CT40.
WARNING: The CT40 should not be used adjacent to or stacked with other equipment. If adjacent or stacked use is
necessary, the CT40 should be observed to verify normal operation in the configuration in which it will be used.
44

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw SunTech CT40 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van SunTech CT40 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,09 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van SunTech CT40

SunTech CT40 Gebruiksaanwijzing - Nederlands - 52 pagina's

SunTech CT40 Gebruiksaanwijzing - Deutsch - 49 pagina's

SunTech CT40 Gebruiksaanwijzing - Français - 50 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info