! SRVD (Subaru Rear Vehicle Detec-
tion) (if equipped)
After entering the “SRVD” menu, select
the “Warning Volume” menu. You can set
the volume of the warning buzzer that
sounds when the SRVD is in use. You can
select “Max”, “Mid”, “Min” or “Off”.
! Vehicle Setting
After entering the “Vehicle Setting” menu,
select one of the following menus.
! Keyless Entry System
After entering the “Keyless Entry System ”
menu, select one of the following menus.
. Audible Signal (models with “key-
less access with push -button st art
system”):
The audible signal can be activated or
deactivated. Select “On” to activate. Se-
lect “Off” to deactivate.
. Hazard Warning Flasher (all mod-
els):
The hazard warning flasher operation can
be activated or deactivated. Select “On” to
activate. Select “Off” to deactivate.
. Driver Door Unlock (models with
“keyless access with push-button start
system”):
The door unlock selection function for the
driver’s door can be activated or deacti-
vated. Select “On” to activate. Select “Off”
to deactivate.
. Rear Gate Unlock (Outback with
“keyless access with push-button start
system”):
The door unlock selection function of the
rear gate unlock button of the key can be
changed. Select “All” to unlock all doors
and the rear gate. Select “Rear Gate” to
unlock only the rear gate.
! Defogger
The defogger and deicer system can be
set for the continuous operation mode or
automatic shut-off mode. Select “Contin-
uous” to select the continuous operation
mode. Select “15 minutes” to select the
automatic shut-off mode.
! Interior Light
The setting for the period of time in which
the interior lights remain on (OFF delay
timer) after closing the doors and/or the
rear gate can be set or customized. Select
the preferred seconds to customize the
operation period. Select “ Off” to deactivate
the OFF delay timer.
! Auto Light Sensor
The operational sensitivity of the auto on/
off headlights can be set. You can select
“Max”, “Mid”, “Low” or “Min”.
! Welcome Lighting
After entering the “Welcome L ighting”
menu, select either of the following me-
nus.
! Approaching Time Set
The setting for the period of time in which
the low beam headlights remain on when
approaching the vehicle can be set or
customized. Select the preferred seconds
to customize the operation period. Select
“Off” to deactivate the welcome lighting
function when approaching.
! Leaving Time Set
The setting for the period of time in which
the low beam headlights remain on when
exiting the vehicle can be set or custo-
mized. Select the preferred seconds to
customize the operation period. Select
“Off” to deactivate the welcome lighting
function when exiting.
! Default Settings
Select “Yes” to use the menu screen to
restore customized settings to the factory
default settings. Select “No” to return to
the previous screen without restoring to
the factory default settings.
Instruments and controls/Multi information display
3-41
