424893
17
Verklein
Vergroot
Pagina terug
1/31
Pagina verder
PART 1 • English
16
Network search: if this item is set to “Nothen receiver will search for the channels that are available from
preset transponder list of selected satellite. If this item is set to “Yesthen receiver in
addition will search for the channels from transponders information about that can be
found from broadcast. Use this option to get new channels that appeared on satellite.
Search for: you can select type of the channels that will be installed to your receiver. If selected
All channels then receiver will install Free-To-Air and Scrambled channels. If selected
Scrambled then receiver will install only Scrambled channels. If selected FTA then
receiver will install only Free-To-Air channels. Once you complete all settings you can
start channel search process.
Press RED button to install channels from all transponders of the satellite;
Press GREEN button to install channels from transponder selected in Transponder item;
Press YELLOW button to enter to Manual setup channels from specific transponder or
to setup single channel with known Video and Audio PID.
Manual setup of channels
In Manual channel search menu you can setup all channels from specific transponder or single channel.
To setup all channels from specific transponder:
Satellite: indicate name of the satellite where channels will be searched
Frequency:
Use 0 ~ 9 buttons to enter frequency of transponder
Polarisation control: Use tu buttons to select polarisation of transponder
Symbol rate:
Use 0 ~ 9 buttons to enter symbol rate value
Network search: Use tu buttons to select ON or OFF
Search for: Use tu buttons to select type of channels to be installed Press RED (Search)
button to start channel search.
5.2.1.1 Positioner setup
If in Dish setup menu you have configured Dish mode as “DiSEqC 1.2” then you have to setup position of
the dish to each satellite that you want to install.
In Channel setup menu move menu focus to Dish position item and press OK button on remote control.
Menu Positioner setup will appear on screen.
Satellite:
Displays the name of satellite position of antenna for which you setup
Transponder:
Use tu buttons to select reference transponder, receivable in your location, to
measure signal strength and quality
Movement speed:
Use tu buttons to select between Slow and Fast. Slow speed allows you to fine adjust
position of the dish (each press to direction button will turn dish to short angle). Fast
speed can be used to adjust dish position roughly. If Movement speed set to Fast
press to direction button will cause continuous movement of the dish to appropriated
direction, to stop dish you will have to press OK button.
Move:
Use tu buttons to move dish to the East/West direction
Centre position: If you press
OK button while menu focus is on this item then dish will be turned to
centre position, which corresponds to true South direction.
Limits:
Use tu buttons to Enable or Disable software limits of your positioner.
Set limit: Use tu buttons to select East or West limit of dish movement range.
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Strong srt 7335 hd bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Strong srt 7335 hd in de taal/talen: Engels als bijlage per email.

De handleiding is 1,79 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Strong srt 7335 hd

Strong srt 7335 hd Gebruiksaanwijzing - Deutsch - 31 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info