PART 1 • English
18
n Software Upgrade: You can download the latest software available including new
technologies to your receiver. To upgrade your system, apply the following steps:
1. Select “Software Upgrade” and press OK. Enter your PIN code.
2. Press the GREEN button to scan the satellite for availability of a newer
software version. If there is a recent software version available for your
receiver, it will be detected.
3. Press the RED button to start the upgrade.
4. Press the BACK button until you go BACK to main menu.
NOTE: Be sure that your receiver is connected to the satellite signal.
Do not turn off your receiver while you are downloading
new software.
n System Info: The system information displays information about your receiver such
as model number, software and boot version. To check system information, apply the
following steps: select “System information” and press OK. Press BACK to return to
the menu
n Mediaguard: Here you will find information about the embedded Mediaguard
decoder.
1. Select “Mediaguard” and press OK.
2. Press BACK to return to the menu
n Factory Reset: Be careful when using this function, because it will erase all the data and
parameters you may have set earlier to your receiver. Once you have made a Factory
Reset you will have to re-install your preferences and re-scan your channels. To reset your
receiver to factory default, apply the following steps:
1. Select “Factory Reset” and press OK.
2. Enter your PIN Code. The receiver will reset itself to the original
factory settings.
NOTE: Your PIN code will change BACK to the factory setting “0000”.
5.1.4.2 LNB Set-up
It is recommended that you read the manual and installation instructions of your LNB, your DiSEqC
switch, your 0/12 V switch and your Positioner before you start setting up your LNB. To set up your LNB,
please apply the following steps:
1. Press the MENU button.
2. Using UP/DOWN keys, select “Installation” and press OK.
3. Using UP/DOWN keys, select “LNB Set-up” and press OK.
4. Check the exact specifications of your LNB through the manufacturers information or your
dealer. There are up to 16 types of LNB’s available. The Default is set to Universal mode
(9750/10600MHz), DiSEqC is not used and the LNB is mounted on a fixed dish.
