751661
12
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
8
By connecting your receiver to a digital amplier or home theatre system, you can enjoy the best
possible sound quality and multi-channel audio (depending on broadcast). Connect your Digital Audio
Amplier or home theatre system with a suitable cinch cable to the S/PDIF connector on the back of the
receiver
Connecting to a digital audio amplier and TV using HDMI
By connecting your receiver to the latest digital ampliers or Home Cinema systems you will enjoy the
best possible sound quality and multi-channel audio (depending on broadcast). Connect the HDMI
output of the receiver to an input of your amplier, and then connect the HDMI output of the amplier
to your TV set. Select the correct input on your amplier to watch and listen to programmes.
4.0 STARTING UP FOR THE FIRST TIME
Make sure that your receiver and antenna are connected/aligned correctly. If you have any related
questions accordingly, please contact your local service or retailer. The rst time installation will guide
you through the required steps, after that you will be able to enjoy your HD TV completely. If you already
connected an Ethernet cable to your receiver, you can access the EVOTV portal. We wish you lots of fun
with your new product.
1.19 Language selection
When you use your receiver for the rst time, the Preferred Language menu appears. Use pq to select
the desired language. Once you have selected your language, press the GREEN Next button to go to the
next page.
1.20 Region, Subtitles, Scan Mode and screen settings
The receiver will now show the “First Time Installation screen where you can adapt some of the most
important settings. Use pq to move to the desired setting and use tu to change values. Press the
GREEN Next button to go to the next page or press the RED Back button to go one step back. The
following settings are available:
Region: The region is set to Croatia and this can't be changed as this receiver is destined for
Croatia.
Subtitles Display: Select On to display subtitles whenever they are available, select O if you don't need
them to be shown.*
Aspect Ratio: Use this option to select the aspect ratio of the connected TV. The options are: 4:3 for a
4:3 TV (black bars on top and bottom of picture) and 16:9 for 16:9 TV sets.
Scan mode: Select All to store scrambled and free-to-air channels or select Free to store only free-to-
air channels.
Connection: Use this option to select the established connection to your TV set. Select HDMI or
SCART.
*Availability of DVB/HoH subtitles depends on the broadcast. If subtitles are not supported, they can be activated via Videotext if available.
When all settings have been made, press the GREEN Next button to continue.
1.21 Aerial Adjustment
This part of the wizard will help you to setup your antenna and check signals.
Use pq to select the setting and tu to change these values. The following settings are available:
Antenna Power: Set to On if you use an active antenna (with built-in amplier). When set to On, 5 V will
be present at the ANT IN connector of the receiver. Select O for passive antennas.
Channel No.: Select a channel which is known to carry a broadcast signal in your region. The Signal
Strength and Signal Quality bars give a visual indication of the reception. Adjust your
antenna to achieve the maximum signal strength and quality.
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Strong SRT 8550 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Strong SRT 8550 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,67 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info