480560
16
Verklein
Vergroot
Pagina terug
1/27
Pagina verder
PART 2 • English
13
English
6.3.1 Language Setting
In this menu you can set your language of chioce for menu, audio and subtitles.
OSD Language: Use t/u to select menu language.
Audio Language: Digital TV allows transmitting more than one audio track/
language. If a channel has multiple audio tracks/languages,
the receiver will select the suitable audio track/language
automatically according to your selection.
Subtitle Language: This setting allows you to define the subtitle language. Use t/u
to select a subtitle language and the receiver will display the
subtitles in this language automatically (if available). If you do not
want to display subtitles, then adjust the setting to Off.
NOTE: Subtitles will be displayed when available. Availability depends on the
local broadcast.
Please also consider that events may contain “built in” subtitles which can’t be disabled.
6.3.2 Output Setting
In this menu you can set the output parameters of the receiver according to the connected TV set
and for the connected audio amplifier if applicable.
TV Mode: Use t/u to select the mode. Commonly the PAL standard is
used, but it might be that you need to use the setting NTSC. We
recommend referring to the user manual of your TV set to check
the correct setting.
Video Output: Use t/u to select between RGB and CVBS modes.
Screen Mode: Use t/u to adjust this setting in accordance with the aspect
ratio of your TV set (4:3 or 16:9) and the preferred conversion.
The options are: Auto (automatic detection of aspect ratio), 4:3
Panscan (displays 16:9 broadcasts full screen and cut upper and
lower parts of 16:9 video on your 4:3 TV), 4:3 letterbox (displays
16:9 widescreen broadcasts with black bars on top and under the
picture on a 4:3 TV). For a modern 16:9 TV set following options
can be set: 16:9 Wide Screen, 16:9 PillarBox (4:3 broadcasts will be
shown with black vertical bars on the left and right side of the
image) and 16:9 Pan&Scan. We recommend trying these settings
in order to find the option that suits you best. Do not forget
about the possibility to control the TV format via the menu of
your TV set.
HDMI Output: Allows you to change the resolution of the HDMI output. If the
connected TV does not support the set resolution you will see a
black screen. In this case, wait for 10-15 seconds without pressing
any buttons on the remote control of the receiver, and the
previous value will be recovered automatically.
Loop out in stand-by: This allows to by-pass the antenna signal to the ANT OUT
connector, where you may have an additional TV set/receiver
connected, in order to receive analogue/digital broadcasts there
too.
Digital audio: Use t/u to adjust this setting in accordance to the used audio
equipment. To loop the digital audio through HDMI or S/PDIF to
a connected amplifier, home theatre or other equipment able to
decode AAC and AC3, set RAW HDMI ON.
If neither your TV set nor any other connected audio equipment support decoding AAC and AC3,
adjust RAW HDMI OFF.
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Strong SRT 8525 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Strong SRT 8525 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,02 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info