13
n Change CA PIN
Enter CA PIN
Enter the current code for your card
Enter new CA PIN
Enter the desired code
Confirm new CA PIN
Repeat the desired code
n Maturity Rating
Choose with pqtu the access level for your program card and enter CA code to change the
level.
n About Conax CA
Here you will find information about your program card
6.0 FUNCTIONS
6.1 Standby/Power button
Press Standby/Power to turn on the receiver.
If you press the Standby/Power button again the receiver will go to stand by mode.
6.2 Program Guide
1. Press the EPG button on the remote control to go to ”Program Guide”
2. Use pqtu buttons to choose channel.
3. Press RED ”Previous day” to see program information for the previous day.
4. Press GREEN ”Next day” to se program information for the next day.
5. Press YELLOW ”Details” to see details about the chosen program.
6. Press BLUE ”Timer” to set up a timer function for the selected program
7. Press EXIT to leave the Program Guide.
6.3 Changing Channels
1. Stepping through the channel list:
To move through the channel list, press the P+ or P- key on the remote control.
2. Selection by on-screen channels list:
You can also select the required channel directly from on-screen channel list. This is
displayed using the remotes OK button.
n Press pq buttons to select channel step by step
n Press tu buttons to select between the different channel lists.
n Press OK button to switch to the desired channel.
