751658
22
Verklein
Vergroot
Pagina terug
1/26
Pagina verder
storage device. At the end of the process, the “Formatting is complete” message will appear. Press
EXIT twice to exit the menu.
Network Apps Note: These simple network applications will only work if you have set up the
Network Setting in the System menu and have a working connection to the
internet. (Status: Internet)
Follow the On-Screen button suggestions to navigate through and edit the Apps.
8.0 TROUBLESHOOTING
There may be various reasons for abnormal operation of the receiver. Check the receiver according to
the procedures shown below. If the receiver does not work properly after checking it, please contact
your dealer or the local Service Hotline or send email to our Support via www.strong.tv. Do NOT try to
open or disassemble the receiver. It may cause a dangerous situation and warranty will be void.
Problem Possible cause What to do
The LED/standby
indicator and
LED display (if
available on your
receiver) are not
switching on.
The power cable or power
adapter is unplugged.
Check that the power cable or power
adapter is plugged to the wall outlet.
If your receiver has a main power
switch: The main power switch
on the rear panel is set to OFF.
Switch the main power on.
The electrical outlet may be
damaged.
Check with another device if the electrical
outlet is supplied.
No signal. The receiver is not connected
to the signal source (DVB-C) or
to the antenna (terrestrial or
satellite antenna).
Check the lead of the antenna or cable.
Check that the coaxial cable is correctly
fitted to the antenna input on the receiver.
Damaged or defective
connectors (IEC-connectors
(DVB-T2).
Check connectors for visible damage.
The antenna (terrestrial or
satellite) is damaged.
Check the antenna for visible damage.
Out of digital signal area. Check with your dealer or contact your
local Service.
An active antenna requires that
the antenna power/external
power is switched ON.
Switch the antenna power of the receiver
ON/connect an external power source.
Wrong direction of the antenna. Check the signal strength and quality and
adjust your antenna correctly, or contact
your local Service.
Multiswitch is defective or
power cable or power adapter of
Multiswitch is unplugged.
Check that the power cable or power
adapter of Multiswitch is plugged to the
wall outlet. Contact your local Service.
18
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Strong SRT 8222 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Strong SRT 8222 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,89 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Strong SRT 8222

Strong SRT 8222 Gebruiksaanwijzing - Français - 28 pagina's

Strong SRT 8222 Gebruiksaanwijzing - Italiano - 28 pagina's

Strong SRT 8222 Gebruiksaanwijzing - Espanõl - 28 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info