480567
20
Verklein
Vergroot
Pagina terug
1/23
Pagina verder
17
PART 1 • English
English
When the timer banner is on screen (activated by pressing u or INFO), the following actions
are possible:
tu and press OK to jump forwards and backwards in time during playback.
1 = Set marker point in play back, press again to delete marker point.
2 = Jump to next marker point.
3 = Jump forwards in time. (See details in 7.6.5 DVR Configuration under Step to.)
NOTE: You can also access the Record Manager from viewing mode with the RED
key on the remote control. The help banner at the bottom of the screen
explains all buttons used in this record manager to edit. Press EXIT to save
the settings and quit the menu.
7.6.3 DVR HDD Information
This option shows relevant information about the connected USB device.
Select DVR HDD Information from the Media+ menu and press OK to enter.
Press EXIT to leave.
7.6.4 HDD Format
The HDD format menu allows you to format the connected USB device.
WARNING! Formatting will permanently delete ALL data stored on the connected device.
Please make a backup copy of all data you wish to keep before entering the
HDD Format menu. STRONG cannot be held responsible for loss of data
from USB devices used with this receiver.
Select HDD Format from the Media+ menu and press OK to enter. Use tu to select the partition you
wish to format (Partition 1 is set per default) and press q to highlight Format. Press OK to proceed,
select Yes or No, or press EXIT to leave without formatting.
NOTE: It is possible to use already NTFS formatted USB disks.
7.6.5 DVR Configuration
This menu allows you to make settings for Time Shift, recording and playback.
Select DVR Configuration from the Media+ menu and press OK to enter.
Use pq to move the highlight and tu to change settings.
Press EXIT to quit.
Time Shift: On or Off. When Time Shift is set to Off, Time Shift becomes inactive.
Time Shift to Record: On or Off. When set to On, Time Shift is also possible during record.
Record Type: TS or PS. When TS is selected, recordings will also include subtitles and
teletext (when available). PS makes recordings without these extras.
Record Selection Select the partition whereto the receiver should record.
Standby after record: On or Off. Select if receiver must go to standby mode after Timer record.
Step to: 30 sec to 10 min. Set the time step you like to jump forward with the button 3
during playback of recorded files.
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Strong SRT 8106 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Strong SRT 8106 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,2 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info