751654
25
Verklein
Vergroot
Pagina terug
1/30
Pagina verder
NOTE: SatCR can only work in combination with an optional multi-output (max. 8) satellite
splitter and a SatCR LNB, an example is STRONG type SRT L780 (max. 4 users).
NOTE: SatCR cannot be combined with any other DiSEqC function. SatCR systems are
mainly installed by professional experts.
7.5.2 Channel Search
The channel search procedure from the menu is almost the same as described in First Time Installation
chapter 4.3. This section contains more detailed information on how to add, modify or update your
channel list. In order to view video programmes, you must do a channel search with or without
smartcard in order to install the channel list of your choice. For HD+ channels, first insert HD+ smartcard
at the side panel of the receiver before you start the channel search. Then the receiver will install the
associated channel list of the HD+ bouquet (FTA and encrypted). For FTA channels only or for channels
from other satellites you do not need to insert the HD+ smartcard.
Select the search scheme you wish the wizard to follow:
1. Select HD+ channels to search for channels of the HD+ bouquet (channels numbered 100 and
above).
2. Select Preinstalled channels to restore a predefined German channel list from the receiver’s
memory (channels numbered 1~99).
3. Select Advanced channel search to search for channels on all/selected transponders for the
selected satellite (channels numbered above HD+ bouquet numbers).
Use the p q buttons to select the required search scheme. Use the t u buttons when you want to
change the value or press OK to select it from the list. Use GREEN to perform an HD+ channel update.
Use RED to restore the original HD+ channel list.
Use the button to return to the previous step. Press to exit the menu and to go back to the viewing
mode.
NOTE: If the messages No list found or No channels found are displayed, please check
the antenna connections, select correct satellite and check signal level and other
parameters from the satellite dish for selected satellites, as described in chapter 7.5.1.
Advanced channel search
Satellite: Select a satellite to be configured and scanned.
Transponder: Select the transponder you want to scan from the list of existing transponders.
Press RED to edit the parameters of the selected transponder. Press GREEN to add
a new transponder. Press YELLOW to delete the selected transponder (required
confirmation).
Frequency: Get information about the transponder frequency.
Symbol: Get information about the symbol rate of the selected transponder.
Polarization: Get information about the polarization of the selected transponder.
Search Mode: Select the channels that shall be installed. Available options: Free, Scrambled or All.
Channel Type: Select the type of channels that shall be installed. Available options: TV, Radio or
TV&Radio.
Search on:: Select where to search for new channels. Available options: One Transponder, One
Satellite or Selected Satellites.
The Signal Strength and Signal Quality indicators on the 2nd half of the screen will help you to make sure
that you get the signal with the selected parameters, as well as to adjust the antenna if necessary.
21
English
25

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Strong SRT 7806 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Strong SRT 7806 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,27 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Strong SRT 7806

Strong SRT 7806 Gebruiksaanwijzing - Deutsch - 35 pagina's

Strong SRT 7806 Gebruiksaanwijzing - Türkiye - 35 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info