751652
12
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
3.3 Connecting to your motorised dish via DiSEqC 1.2 or GOTO-X
Fig.8
Another possibility for watching programmes from multiple satellites is by mounting a dish to a
motorized DiSEqC 1.2or GOTO-X positioner. For the correct setup and mounting of your motorised dish
we recommend referring to the advice of a professional satellite equipment installer to ensure correct
alignment and function. Please ensure that all connections are tting well and are correctly assembled,
then you only need to connect the “OUT connector of your positioner to the SAT IN connector on the
rear side of your receiver.
3.4 Extended connections for your home entertainment
Fig.9
a. Connect one end of a good quality coaxial audio cable to the S/PDIF output of your receiver
and the other end to the coaxial audio input of your home theatre set, amplier or any other
device supporting digital audio.
b. Connect your USB 2.0storage device to this connector by using a good quality USB cable or
insert the device directly.
4.0 STARTING UP FOR THE FIRST TIME
Ensure that your satellite signal is of good quality and that all connections are properly setup. In case you
encounter diculties or you have questions, please ask your local dealer for assistance.
It is recommended to follow the First Time Installation step by step. It will guide you through the basic
setup and installation process. You will enjoy digital HD broadcasts within just a few minutes.
In the unusual/uncommon case that the receiver should not start-up within the First Time Installation,
please reset the receiver with the factory reset DEFAULT PIN: 0000).
Please insert your valid and activated Irdeto smartcard for proper reception of the channel bouquet of
your choice.
4.1 Language (Step 1)
After connecting your receiver for the rst time, the Welcome 1st Step: Language menu will be shown on
screen. First, choose your preferred language by using pq. After selecting, conrm by pressing OK to
go to Step 2.
4.2 Audio and Subtitle Setup (Step 2)
In this next step Welcome 2nd Step: A/V Output Settings menu you can choose your preferred audio
language and TV screen settings. If you are satised with the default settings just proceed by pressing
OK at the selection Next.
Aspect Ratio Select the TV screen you are using. The options are 16:9 and 4:3.
Aspect Conversion Select conversion for the TV screen if needed. The options are Pan&Scan,
Letterbox, Pillar or Full screen.
First Audio Language Select the main audio track language which you prefer to hear as rst choice.
Either press OK for a list with all available languages or use tu to select a
language.
Second Audio Language Select the second audio track language which you prefer to hear if the rst
choice not is available.
8
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Strong SRT 7502 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Strong SRT 7502 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,91 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info