480572
16
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
13
PART 2 • English
English
6.3.2 Audio Mode and Language
Press A.FORMAT button in viewing mode. Further pressing will change audio channel between Left, Right and Stereo.
Press the LANG button to select one of the available audio languages.
6.3.3 Video Format
Press the V.FORMAT button in viewing mode. Further pressing will change the HDMI resolution. You will only see
differences if you are connected via HDMI.
6.3.4 Teletext
Press TXT button in viewing mode. If teletext is available in several languages, select a language from the list.
6.3.5 Subtitles
Press SUBT button in channel view mode. The list of available subtitle languages will be displayed. Use pq to select a
language and confirm with OK. To disable subtitles press SUBT button once more.
6.3.6 Special buttons
Use below buttons in viewing mode to perform desired actions.
DIGIAKTIF: Shows technical information of the current channel and might help to resolve channel
related issues.
MODE: Gives you direct access to GAMES menu.
MEDIA: Gives you direct access to the Media Browser in case a USB device has been connected.
P<P: Switches between the last two watched channels.
TIMERS: Gives you direct access to the TIMERS menu.
PAUSE: Will give you access to the ZOOM menu. Use the buttons described within to perform the
different zoom actions.
A.1 TROUBLESHOOTING
There may be various reasons for the abnormal operation of the receiver. Check the receiver according to the procedures
shown below. If the receiver does not work properly after checking it, please contact the dealer. Do NOT open the
receiver cover. This may cause a dangerous situation and will void the warranty.
Symptom Cause Remedy
The display on front
panel does not light up.
The power cord is not plugged in. Check if the power cord is plugged in to the wall
outlet.
No picture or sound Wrong connection of the Audio/Video
output of the receiver to TV or Amplifier.
Connect the Audio/Video output of the receiver to
TV/Amplifier correct.
Audio muted. Press the MUTE button.
TV powered off. Turn TV on.
No picture The receiver can’t receive the signal. Check the antenna cable, replace the cable, or
connect the cable to the receiver tightly.
Incorrect values of some tuner
parameters.
Set the values of tuner parameters correctly in
installation menu or check channel parameters
with values from kingofsat.net or Lyngsat.com
Wrong direction of the dish. Check the signal strength with a spectrum analyzer
and adjust your dish correctly.
HDMI connection not detected/
established correctly.
Please switch ON the receiver firstly and switch ON
TV set afterwards. It might happen that there are
observed interruptions on HDMI due cable quality
not sufficient, in such cases we can recommend a
HDMI amplifier or better quality cable.
Irdeto Message E30-4 Validation in progress It can take up to 7 min. until card validation
process is finished. Please do not power off the
receiver or remove the smartcard during this time.
The remote control does
not work
The batteries of the remote control are
not inserted or exhausted
Check whether the batteries are inserted correctly
in your remote control. Check the batteries, and
if exhausted replace the batteries in the remote
control.
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Strong SRT 7500 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Strong SRT 7500 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,53 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info