568528
17
Verklein
Vergroot
Pagina terug
1/34
Pagina verder
13
English
PART 1 • English
DiSEqC1.2 Move the motor to the right position for locking the signal like explained
below.
Move Continue: press tu for moving West/East. It will keep moving as long
as the button is kept pressed. By pressing once it will move in 1° step.
Move Step(1): press tu for moving West/East in 0.3° step.
Store Position: to store the current motor position for selected satellite.
Goto Reference: to go to the reference 0° position.
GOTO X Select GOTO X with the tu buttons. Press GREEN to setup your location
coordinates. A pop-up window will appear, in which the following settings
can be made:
Location: Press tu to select one of the pre-set locations. Choose a location nearest to
you. If you know the coordinates of your place of residence, you can choose
Manual and make the following extra adjustments:
Longitude Direction: Choose East or West.
Longitude Angle: Press the 0 ~ 9 buttons to enter the coordinate.
Latitude Direction: Choose North or South.
Latitude Angle: Press the 0 ~ 9 buttons to enter the coordinate.
When all settings have been made, press EXIT to save the data and leave the window.
Now press OK to enter the GOTO X menu.
Move Auto will move the dish to the selected satellite automatically.
For Move Continue, Move Step (1) and Goto Reference please see explanation above.
SatCR Select On, if you use a SatCR LNB, otherwise leave to Off. When On is selected
press YELLOW (Setup SatCR) to enter the Sat setup page.
Position: Select the LNB A or LNB B.
IF Channel: Select the IF channel number according to the specifications of your SatCR
LNB. Note: Any SatCR LNB in the chain needs a different IF channel number.
Center Frequency: Select the Center Frequency according to the specifications of your SatCR
LNB. Note: Any SatCR LNB in the chain needs a different Center Frequency.
Select the store button to finalize your settings or press MENU or EXIT to leave without storing.
7.1.3 Satellite and Transponder edit options
When in Satellite Setting use the RED TP Edit button to edit Satellites and Transponders.
Use tu to switch between Left and Right window. (Satellite List and Transponder List.)
Add: While in the satellite name list: Press YELLOW to add a new satellite. In the
popup window, enter a satellite name with the key table (press u), selecting
a character by using the navigation buttons. Press OK to enter the chosen
character. When you have entered the name, navigate to the “floppy disk-
symbol” on screen and press OK on the remote control to confirm the new
name. Select the satellites position E for East and W for West. Longitude: Use
the numeric keys to enter the longitude of the satellite. Save the settings with
OK or cancel with EXIT. While in the Transponder list: Press YELLOW to add
a new Transponder. In the popup window enter the frequency, symbol rate
and polarity of the new transponder.
Delete While in the satellite name list: Press BLUE to delete a satellite from the
list. Press GREEN to delete the selected satellite, select YELLOW to delete
all satellites. Confirm deleting with OK or EXIT to cancel. While in the
17

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Strong-SRT-7004

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Strong SRT 7004 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Strong SRT 7004 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,92 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Strong SRT 7004

Strong SRT 7004 Gebruiksaanwijzing - Deutsch - 40 pagina's

Strong SRT 7004 Gebruiksaanwijzing - Français - 34 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info