751439
12
Verklein
Vergroot
Pagina terug
1/23
Pagina verder
The installation will proceed to the Internet Connection screen, choose between Setup or Skip and
confirm with OK. If you choose Setup you will be forwarded to the network configuration screen; with
Skip you automatically jump one screen further and you are able to choose the correct time zone.
On the following screen, you can select the Antenna scan type, choose the one you like to use and
follow the on-screen instructions. Select which input source you want to use: DTV to receive digital
terrestrial broadcasts or ATV for analogue terrestrial reception. Other tuners can be set-up if you choose
for to Skip. Select Cable to receive digital or analogue cable broadcasts or Satellite to receive digital
satellite broadcasts (if you have a satellite dish).
3.1 DVB-S2 installation
Satellite Setting
Press the MENU button and select Channel Scan by pressing OK.
Use the pq buttons to go to Tuner Type menu and by pressing pq again in the menu you can select
Satellite, confirm with OK and press BACK to return to the previous menu.
Channel Search
Use the pq buttons to choose Auto Tuning and press OK to confirm. The default setting is ASTRA 19.2.
Use t u if you like to select a different satellite signal and press OK to confirm.
With the pq buttons you can decide which scan options shall be used:
Channel Type Choose between Free & Scramble and Free.
Service Type Select DTV to search DTV channels only, or All for a complete search.
Network Search Network Scan on the selected satellite.
Clear DB Choose between All or OFF if you want to delete channels that were
previously saved during the installation of new channels.
It is recommended to use the default settings. Then select Auto Scan and press OK to proceed. Scanning
a full satellite may take a while to complete.
You have the same possibilities with the DTV - Manual Tuning process.
NOTE: Network Scan: This function allows you to search for the NIT data of the
corresponding satellite to receive newly appeared channels. Please consider
that unlike Astra 19.2 or HOT BIRD 13° some satellites do not offer this
function or only support it partly. If you have any questions, please contact
your dealer or the service/service hotline.
3.2 DVB-T2 installation
Terrestrial Setting
Press MENU and select Channel Scan by pressing OK. First use the pq buttons to enter the Country
menu and select the country you are living in, confirm with OK and return to the previous menu with the
BACK button.
Use the pq buttons again to go to the Tuner Type menu and by pressing pq you can select Antenna,
confirm with OK. The TV will now search for digital channels.
After choosing the Antenna option, go to Auto Tuning and choose between DTV, ATV or both scan
options. Select one and confirm by pressing the OK button; with BACK you return to the previous menu.
8
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Strong SRT 43UA6203 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Strong SRT 43UA6203 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,51 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Strong SRT 43UA6203

Strong SRT 43UA6203 Gebruiksaanwijzing - Nederlands - 23 pagina's

Strong SRT 43UA6203 Gebruiksaanwijzing - Deutsch - 27 pagina's

Strong SRT 43UA6203 Gebruiksaanwijzing - Français - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info