751407
13
Verklein
Vergroot
Pagina terug
1/26
Pagina verder
4.0 INSTALLING CHANNELS
4.1 Initial setup
Initial setup involves selecting all the settings required to be able to search for and store all the
analogue and digital channels you can receive.
Make sure that the television is switched on and follow all the steps in turn specified hereafter.
NOTE: If the channel search retrieved only the analogue channels it could
be caused by poor broadcasting and therefore is not covered by
manufacturer warranty. Manufacturers cannot be held responsible for lack
of or poor broadcasting in some areas.
The first time you switch the set on, the Initial setup wizard opens, which guides you through the
initial setup process.
Fig. 6
Press p q to select your language, then press OK/u to enter the next step.
Press p q to select your country, then press OK/u to enter the next step.
NOTE: If you select France, you will have to enter the Password setting menu
here in order to set a password. Use the 0 ~ 9 buttons to enter a four-digit
number for your password. (0000 is too simple to be set as your password.)
Re-enter the same code to confirm the password. After that, you will enter
the next step automatically. (In this step, you can only press t to return to
the previous step.)
Press p q to select your tuner mode Antenna or Cable.
Then follow a) or b) below.
a) If you have selected Antenna.
Press OK/u to enter.
Press p q to select Digital & Analogue or Digital or Analogue, then press OK/u.
Press p q to select Scan, then press OK/u to start the automatic search for all DVB-T digital
and/or analogue channels.
b) If you have selected Cable.
Press OK/u to enter.
Press p q to select Digital & Analogue or Digital or Analogue.
If you select Digital & Analogue, press OK/u to enter. Then:
Press p q to select Scan, then press OK/u.
Press t u to select the scan mode if available (Full or Advanced).
If you select Full, press OK to start the automatic search for all DVB-C digital and/or
analogue channels.
If you select Advanced, use the 0 ~ 9 buttons to adjust the values for frequency, symbol
rate, network ID, and use t u to select the modulation mode; then press OK to start the
search for all DVB-C digital and/ or analogue channels.
If you select Digital, press OK/uto enter, then follow all the same steps as for Digital & Analogue
above, to search for all DVB-C digital channels.
If you select Analogue, press OK/u to enter, pressp q to select Scan, then press OK/uto start
the search for all analogue channels.
9
PART 1
English
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Strong SRT 40FY4002N bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Strong SRT 40FY4002N in de taal/talen: Engels als bijlage per email.

De handleiding is 1,36 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info