555271
8
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
8
any kickback force. Always use the auxiliary
handle, if included in the delivery, to ensure
optimum control over kickbacks or reaction
torques during start-up. The user can control
reaction torques or kickbacks if suitable pre-
cautionary measures are taken.
Never place your hands near rotating tools.
Tools can kick back over your hand.
Never position your body in the area in which
the machine moves in the event of a kickback.
A kickback accelerates the machine in the di-
rection of rotation opposed to the disc at the
jamming point.
• Take extra care when working in corners, on
sharp edges, etc. Avoid kickbacks and pre-
vent the tool from seizing. Corners, sharp
edges or a jump back tend to cause the ro-
tating tool to catch, thus leading to a loss of
control or a kickback.
Special safety instructions for ne sanding
Do not use excessively large sanding discs
when ne sanding. Observe the speci cati-
ons of the manufacturer when selecting abra-
sive discs. A sanding disc that is too large and
protrudes over the sanding pad represents a
cutting injury hazard and can cause catching,
disc tears or kickbacks.
Additional warning notes
Hold the machine rmly with both hands and
assume a stable stance when performing
work. Hold the machine with both hands to
guide more securely.
If potentially explosive or self-igniting dust is
produced during sanding, the processing in-
structions of the material manufacturer must
be observed under all circumstances.
Harmful/toxic dusts can be produced during
your work (e.g. lead-containing paint, some
types of wood and metal). Contact with these
dusts, especially inhaling them, can represent
a hazard for operating personnel or persons
in the vicinity. Comply with the safety regula-
tions that apply in your country. Connect the
electric power tool to a suitable extraction
system. To protect your health, wear a protec-
tive mask.
Never use machines with a damaged cable.
Do not touch damaged cables and pull the
plug from the mains power supply if the cable
becomes damaged during work. Damaged
cables increase the risk of electric shock.
ELECTRONICS
The machine features full-wave electronics with
the following properties:
Smooth start-up
The electronically controlled smooth start-up
function ensures that the machine starts up
smoothly.
Speed control
You can regulate the rotational speed steplessly
between 1500 and 2100 rpm using the adjusting
wheel. This enables you to optimise the cutting
speed to suit the respective material.
Constant speed
The preselected motor speed remains constant
through electronic control. This ensures a uni-
form cutting speed even when under strain.
CHANGING SANDING PADS
Insert an Allen key into the Allen screw on the
sanding pad.
Hold the sanding pad securely and turn the
Allen key to release.
In order to further ensure optimum axial run-
out, you must rst clean the bearing surface
for the grinding disk on the driveshaft.
Attach the new sanding pad.
Tighten the screw.
Only attach speci ed sanding pads to the
machine.
AFFI XING ABRASIVES
Compatible sanding discs are quick and easy to
attach to the sanding pad. Simply press the self-
adhesive sanding discs onto the sanding pad.
The adhesive coating holds the sanding pad
securely in position. Make sure that the sanding
disc holes line up with the suction holes. Tear off
the sanding disc when worn.
ADJUSTING THE SUCTION POWER
You can adjust the suction power to match the
surface type, but only when internal extraction
is active.
Use the adjusting wheel to adjust the suction
power.
Start with a low suction power and slowly in-
crease until you can feel that the application
pressure has noticeably changed.
A high suction power makes sanding work on
ceilings and walls less tiring.
DUST EXTRACTION
CAUTION! Breathing in dust can dam-
age the respiratory passage!
Always connect the machine to a dust extrac-
tor.
When performing work that generates dust,
always wear a dust mask.
OPERATION
Connect the machine to the mains power sup-
ply.
Switch on the machine.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Stomer SRS-1100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Stomer SRS-1100 in de taal/talen: Duits, Engels, Frans als bijlage per email.

De handleiding is 0,89 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info