555292
14
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
14
Do not lengthen the spanner, so that you can exercise
more power.
Do not hit on the spanner with a hammer, for tightening
the shaft.
The spanner must be removed, after the shaft that has
been tightened.
Install the saw table and mount the corresponding
screws.
REPLACING THE SAW GUIDE
HAZARD!
If the saw guide has been damaged, then small pieces
can become jammed between the guide and the saw,
which can block the saw blade. Immediately replace a
defective saw guide.
Remove the saw guide.
Remove the defective piece by dislodging it with a
screwdriver.
Insert a new piece and click it in position.
Reinstall the saw guide.
MODIFICATIONS
MODIFICATIONS ON THE MITRE AND WIDTH
GUIDE
Loosen the attachment screws of the guide.
Adapt the guide so that it is positioned exactly at right
angles to the saw blade, when the mitre table is in the 0°
position.
Retighten the attachment screws of the guide.
ADAPTING THE SAWING DEPTH STOP
The sawing depth stop limits the depth to which the saw
extends in the saw blade opening.
The saw depth stop must be adapted, if the saw blade
makes contact with the table.
Loosen the attachment screw of the saw depth stop.
Adapt the saw depth stop in such a way that the saw
blade extends up to the mitre and depth guide in the saw
blade opening.
Retighten the attachment screws of the saw depth stop.
Lower the saw head until it is stopped by the saw depth
stop, and check whether the saw blade can freely rotate
in this position.
CLEANING
Use a brush, a dust cloth or vacuum cleaner, to remove all
wood chips and sawdust from:
The adjustment facilities
The operating components
The motor ventilation openings
The space under the table gap.
Set the support arm to 0° (vertical) and tighten the
bevelling lock nut.
To prevent that the saw blade rotates, pull the saw blade
lock forward. Use your hand at the same time to turn the
saw blade slowly, until the saw blade latch is activated.
Loosen the driveshaft bolt of the saw (left-turning
thread).
Remove the shaft bolt and the outer saw ange from the
saw shaft.
Remove the saw blade from the saw shaft and let it down
to remove it from the machine.
Remove the adapter ring and the inner saw ange from
the saw shaft.
Clean the surfaces of the following components:
The saw shaft
The inner saw ange
The saw blade
The outer saw ange
– adapter ring
The saw blade guard
HAZARD! Do not use any cleaning products (for
instance for removing resin residues) that have
the tendency to cause corrosion on light metals;
this could damage the machine.
Put the inner saw ange and the adapter ring on the saw
shaft.
HAZARD! Be sure to fasten the inner saw ange
correctly! The saw may block, or the saw blade
may come lose, if the ange is not correctly
fastened.
Mount the new saw blade and check the rotating direction
(the arrow on the saw blade must point in the same
direction as the arrow on the saw blade guard!).
HAZARD! Only use saw blades that conform to
the applicable standards and that can be used at
the maximum speed indicated in the technical
data sheet.
DO NOT use:
Wrong saw blades
Saw blades made of high-speed steel (HSS)
Damaged saw blades
Saw blades with missing teeth
HAZARD!
Only use OEM components for installing the saw blade.
Do not use loose reduction rings; the saw blade could
come loose.
Saw blades must be mounted in such a way that they
cannot wobble, and that they cannot come loose during
operations.
Install the outer saw ange.
The two anges must t over the surfaces of the saw
shaft.
Insert the shaft bolt (left-turning thread) and tighten with
a hexagonal spanner.
HAZARD!
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Stomer SMS-1800-T bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Stomer SMS-1800-T in de taal/talen: Engels als bijlage per email.

De handleiding is 1,42 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info