537140
47
Verklein
Vergroot
Pagina terug
1/132
Pagina verder
MS 271, MS 291, MS 291 C
English
45
For standard versions
N Refit the pawl (3) in the rotor and
slip the washer (2) over the starter
post
N Press the spring clip (1) on to the
starter post and over the pegs of the
pawl with a screwdriver or suitable
pliers – the spring clip must point in
the clockwise direction – as in the
picture
For versions with Easy2Start
N Refit the pawls (3) in the rotor and
slip the washer (2) over the starter
post
N Press the spring clip (1) on to the
starter post and over the pegs of the
pawl with a screwdriver or suitable
pliers – the spring clip must point in
the clockwise direction – as in the
picture
Tension the rewind spring
N Make a loop in the unwound starter
rope and use it to turn the rope rotor
six full revolutions in the direction of
the arrow
N Hold the rope rotor tight – pull out
the twisted rope and untangle it
N Release the rope rotor
N Slowly let go of starter rope so that
it winds onto the rotor
The starter grip must be drawn firmly
into the rope guide bush. If it tips
sideways: increase the spring tension by
another turn.
N Remove one turn of the rope from
the rotor
For versions with Easy2Start
N Slide on the spring housing, carrier
and washer
N Carefully place the circlip in the
groove using the circlip pliers
For all versions
N Install the fan housing and shroud
Replacing broken rewind spring
N Remove the rope rotor as described
for "Replace torn starter rope"
N Carefully pry out the broken pieces
of spring with a screwdriver
N Apply a few drops of non-resinous
oil to the new replacement spring
N Position the replacement spring
with frame in the fan housing – the
anchor loop (arrow) must be located
over the retaining lug in the fan
housing
N Apply suitable tools (screwdriver,
punch, etc.) to the recesses and
push the spring into its seat in the
fan cover – the spring slides out of
the frame
N Refit the rope rotor, tension the
rewind spring
N Install the fan housing and shroud
1
2
3
2710BA004 KN
2
3
3
5902BA018 KN
1
It must be possible to turn the
rope rotor on another half-turn
when the rope has been drawn
out completely. If not, the spring
has been tensioned too tightly
and may break!
213BA021 KN
The broken pieces of spring may
still be under tension and can
spring apart unexpectedly on
removal from the fan housing –
risk of injury! Wear face shield
and protective gloves
213BA022 KN
47

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Stihl-MS271

Zoeken resetten

  • hoe regel ik de olie toevoer hij gebruiikt te weinig olie
    Gesteld op 8-5-2020 om 12:07

    Reageer op deze vraag Misbruik melden
  • de zaag start niet meer na oververhitting, wat kan ik doen, zit er een beveiliging opom oververhitting tegen te gaan, en kan ik die beveiliging weer ongedaan maken ? Gesteld op 26-4-2020 om 13:18

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Stihl MS271 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Stihl MS271 in de taal/talen: Engels, Spaans als bijlage per email.

De handleiding is 5,14 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Stihl MS271

Stihl MS271 Gebruiksaanwijzing - Nederlands, Deutsch, Français, Italiano - 212 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info