667242
7
Verklein
Vergroot
Pagina terug
1/208
Pagina verder
ASA 85
English
5
Watch out for tree stumps, roots and
rocks which could cause you to stumble
or fall.
To reduce the risk of accidents, take a
break in good time to avoid tiredness or
exhaustion.
Work calmly and carefully – in daylight
conditions and only when visibility is
good. Stay alert so as not to endanger
others.
The power tool is operated by one-
person only. Do not allow any other
persons in the work area.
Observe the blades – only cut in areas
that you can see.
Be extremely careful when cutting dense
rows of plants, check the other side
before starting work.
To avoid the risk of electrocution, do not
touch electric power lines – never cut
through electric power lines.
When working at heights:
Always use a lift bucket
Never work on a ladder or in a tree
Never work on an insecure support
Never hold a branch with your free hand
directly next to the point you want to cut.
Always maintain a distance of at least
40 cm from the blades. Never touch the
cutting blade. It is very sharp – risk of
injury.
Be wary of flying or splintering material
wear safety glasses.
Clear away fallen branches, scrub and
cuttings only when your cordless
pruning shears are in the standby mode
and fitted in the holster.
In the event of danger or an emergency,
switch off your power tool immediately
and disconnect the connecting cord.
If your power tool is subjected to
unusually high loads for which it was not
designed (e.g. heavy impact or a fall),
always check that it is in good condition
before continuing work – see also
"Before Starting Work". Make sure the
safety devices are working properly. Do
not continue using a power tool that is
not in a safe operating condition. In case
of doubt, consult your servicing dealer.
After Finishing Work / Storing
When the power tool is not in use, put it
in a place where it does not endanger
others. Secure it against unauthorized
use.
Always close the cutting blade, i.e.
standby mode.
Move switch on controller to OFF.
Disconnect the connecting cord
from the power tool.
Put your cordless pruning shears in
the holster.
Remove the battery.
Vibrations
This power tool minimizes the vibrations
transmitted to the operator's hands.
However, the operator should seek
medical advice in the event of suspected
circulatory problems in the hands (e.g.
tingling sensation in the fingers).
Maintenance and Repairs
Before performing any repairs, cleaning
or maintenance work:
Always close the cutting blade, i.e.
standby mode.
Move switch on controller to OFF.
Disconnect the connecting cord
from the power tool.
This avoids the risk of the cutting blade
closing unintentionally.
Service the power tool regularly. Do not
attempt any maintenance or repair work
not described in the instruction manual.
Have all other work performed by a
servicing dealer.
Only use high-quality replacement parts
in order to avoid the risk of accidents
and damage to your cordless pruning
shears. If you have any questions in this
respect, consult a servicing dealer.
Check the electrical contacts and ensure
that the insulation of the connecting
cords and plug of the charger show no
sign of aging (brittleness).
To reduce the risk of serious injury, have
work on the charger (e.g. replacing the
connecting cord) performed only by an
authorized servicing dealer or qualified
electrician.
Observe sharpening instructions keep
the blades in good condition at all times
to ensure safe and proper operation.
To reduce the risk of injury in the event
of a malfunction, switch off the power
tool immediately, disconnect the
connecting cord and remove the battery.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Stihl ASA 85 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Stihl ASA 85 in de taal/talen: Engels, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 10,85 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Stihl ASA 85

Stihl ASA 85 Gebruiksaanwijzing - Nederlands, Deutsch, Français, Italiano, Português, Espanõl, Polski - 296 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info