52149
44
Verklein
Vergroot
Pagina terug
1/54
Pagina verder
Release the rotor -
Let go of rope slowly so that
it winds onto the rotor.
The starter grip must locate firmly
in the rope guide bush.
If the grip droops to one side:
Add one more turn on rope rotor
to increase spring tension.
When starter rope is fully extended
it must be possible to rotate the rotor
at least another half turn. If this is
not possible, the spring is over-
tensioned and could break.
Take one turn off the rope.
Fit the fan housing on the
crankcase.
Set the Master Control lever to d
Push the remaining rope into
the starter grip so that the nipple (6)
is flush with the grip.
Replacing a broken rewind spring
Lubricate the new spring with
a few drops of non-resinous oil.
Remove the rope rotor -
see “Replacing Starter Rope” -
Warning: The bits of spring in the fan
housing might still be under tension and
could fly apart when you take them out
of the housing. To reduce risk of injury,
wear eye and face protection and work
gloves.
Use a screwdriver to carefully pry
the parts of the spring out of the
housing.
Place the new spring with retaining
frame in position in the fan housing -
the anchor loop must engage the
lug.
Apply suitable tools (screwdriver,
punch, etc.) to the recesses
(arrows) and push the spring into
its seat - it slips out of the retaining
frame in this process.
Reinstall the rope rotor, tension the
rewind spring, fit the fan housing
and secure in position.
Replace the chain sprocket
after using two Oilomatic chains
or sooner if the wear marks on the
sprocket are deeper than approx.
0.5 mm (1/64") since this would reduce
the life of the chain.
Check wear marks:
Left: on webs of rim sprockets
Right: on teeth of spur sprockets.
You can use gauge* 0000 893 4101 to
check the depth of the wear marks on
spur and rim sprockets.
It is best to use two chains in rotation
with one sprocket.
Before removing chain sprocket
Remove chain sprocket cover,
chain and guide bar.
Disengage the chain brake:
Pull hand guard toward front handle.
* Special accessory
Checking and Replacing
Chain Sprocket
6
001BA104 ST
42 044
44

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Stihl 044 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Stihl 044 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,68 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info