608366
35
Verklein
Vergroot
Pagina terug
1/460
Pagina verder
The tension is correct when the drive links do not
slip out of the chain guides if you hold the chain in
the middle of the bar (Fig. 5).
M
achines with standard chain tension
adjuster
Loosen the cover nuts, using the supplied
wrench (Fig. 4).
Turn the chain tension adjuster screw (4) to ad-
just the chain tension (Fig. 4).
Raise the bar and tighten the guard nuts se-
curely using the wrench (Fig. 5).
Machines with quick chain tension
adjuster
(SP 375Q, SP 405Q, C 38 T, C 41 T)
Loosen the handle (11) (Fig. 4A).
Turn the ring-nut (15) to obtain the desired chain
tension level (Fig. 5A).
Raise the bar and tighten the handle (11) se-
curely (Fig. 5A).
6. CHECKING THE CHAIN BRAKE
This machine is equipped with a safety brake sys-
tem.
In the event of a kickback while working, following
an irregular contact of the tip of the bar, with a
brusque upward movement that causes the hand
to strike the front guard. In this case, the brake
blocks chain movement and must be released
manually in order to disengage it.
This brake can be operated manually by pushing
the front guard forward. To release the brake, pull
the front guard towards the handgrip until you hear
a click.
To check that the brake works efficiently, proceed
as follows:
Make sure you are holding the machine firmly
with both hands when you start the engine
Use the accelerator level to keep the chain mov-
ing, push the brake lever forwards using the
back of you left hand; the chain must stop im-
mediately.
When the chain has stopped, immediately re-
lease the accelerator lever.
Release the brake.
Do not use the machine if
the chain brake does not function correctly
and have it inspected by your dealer.
WARNING!
Always close the fuel tank
cap firmly.
Immediately clean all tra-
ces of fuel which may have dripped on the
machine or the ground and do not start the en-
gine until the petrol fumes have dissipated.
3. CHAIN LUBRICANT
Only use special oil for chain
saws or adhesive oil for chain saws. Do not use oil
containing impurities so as not to block the oil filter
and to prevent irreparable damage to the oil pump.
The special oil for lubricat-
ing the chain is biodegradable. Use of a mineral oil
or engine oil causes serious damage to the envi-
ronment.
It is essential that you use good quality oil to lubri-
cate the cutting parts effectively. Used or poor
quality oil does not guarantee good lubrication and
reduces the duration of the chain and bar.
It is always worth topping up the oil tank complete-
ly (using a funnel) every time you refuel. Since the
oil tank capacity is enough to guarantee that the
fuel runs out first, you will avoid the risk of operat-
ing the machine without lubricant.
4. CHECKING THE MACHINE
Before starting work please:
fill the relevant tanks with fuel and oil;
check that all the screws on the machine and the
bar are tightly fastened;
check that the chain is sharp and there are no
signs of any damage;
check that the air filter is clean;
check that handgrips and protection devices are
clean and dry, correctly mounted and well fas-
tened to the machine;
check that the handgrips are well fastened;
check that the chain brake is working efficiently;
check the chain tension;
checking functional of the clutch: Before each
use, confirm that there is no chain movement
when the chain saw running at idling speed.
5. CHECKING THE CHAIN TENSION
Perform all operations
with the engine off.
WARNING!
WARNING!
WARNING!
IMPORTANT
IMPORTANT
PREPARING TO WORK 9
EN
35

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Stiga SP 375Q bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Stiga SP 375Q in de taal/talen: Alle talen als bijlage per email.

De handleiding is 8,56 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info