29EN
6.4.4 Replacing a fuse
The machine is fitted with fuses
(1) with different capacities and
functions. Specifically:
– 10 A fuse = protects the main
and power circuits of the elec-
tronic board. When it blows,
the machine stops and the
dashboard light switches off.
– 25 A fuse = protects the bat-
tery charger circuit. When it
blows, the battery gradually runs out and the machine will
have problems starting.
The fuse capacity is indicated on the fuse.
– T-6.3 A fuse (delayed) (2) =
protects the main and power
circuits of the electronic
board. When it blows, the
machine stops and the
dashboard light switches off.
– 15 A fuse (2a) = protects
the battery charger circuit.
When it blows, the battery
gradually runs out and the
machine will have problems
starting.
With Honda engine
A blown fuse must always be replaced
by one of the same type and ampere rating, and never with
one of another rating.
If problems persist, contact Your Dealer.
6.4.5 Dismantling, replacing and remounting the blade
Always wear work gloves when han-
dling the blade.
Damaged or bent blade must always
be replaced; never try to repair it! ALWAYS USE ORIGI-
NAL BLADES BEARING THE SYMBOL !
Only blades with the following codes must be used on this
machine:
84109503/0 or 84109502/0
Both of the blades should be replaced
together, especially when there are slight differences in wear.
IMPORTANT
WARNING!
WARNING!
IMPORTANT
