12
1. STEERING WHEEL
Turns the front wheels.
2. ACCELERATOR LEVER
Regulates the engine's r.p.m. The positions are indicated on a
plate showing the following symbols:
Position «CHOKE» for starting up
Position «SLOW» for minimum engine speed
Position «FAST» for maximum engine speed
When moving from one area to another, put the lever in a posi-
tion between «SLOW» and «FAST» When cutting, go to the
«FAST» position.
3. PARKING BRAKE LEVER
This lever is to stop the machine from moving when it has
been parked, and must always be engaged before leaving the
machine.
The brake is engaged by fully pressing the pedal (11 - 21) and
moving the lever to position «A». When you take your foot off
the pedal it will be blocked by the lever in the down position.
To disengage the parking brake, press the pedal again so that
the lever returns to position «B».
4. KEY IGNITION SWITCH
This key operated control has three positions:
«OFF» means everything is switched off
«ON» activates all parts
EN
4. COMMANDS AND CONTROL INSTRUMENTS