780330
15
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
Adjusting the Tilt of the Handlebars, Bar Ends and Brake
Levers
Adjusting the Brake Lever Reach on STEVENS Road Racing and
Cyclo-Cross Bicycles
Riders with small hands, in particular, should ask their STEVENS dealer to
adjust the brake lever position, i.e. the position where the brake starts to be effec-
tive, to the length of the rider’s fingers immediately on purchase.
Some models of various brands allow an adjustment at the brake lever/shifter,
e.g. by means of adjusting bolts or spacers. In the case of the other models the
brake cables are clamped according to your wishes at the brake bodies. Adjusting
bolts located in this area only serve to compensate brake pad wear.
Have the lever reach adjusted and make sure the first phalanx of the index
finger reaches around the brake lever/shifter. Check the proper adjustment and
functioning of the brake system subsequently, as described in chapter “The
Brake System” in your comprehensive STEVENS user manual as well as in the
instructions of the component manufacturers on the enclosed CD-ROM.
Adjusting the Tilt of the Handlebars and Brake Levers of
STEVENS Road Racing Machines and Cyclo-Cross Bicycles
The straight extensions below the drops should be parallel to the ground or
point slightly downwards towards the rear. The ends of the brake lever/shifter units
should meet an imaginary extension of the bottom line of the drops, the upper
part of the lever is then in horizontal position or points slightly upwards. Shifting
the brake levers/shifters is a job best left to your STEVENS dealer, as it involves
retaping the handlebars afterwards.
To adjust the tilt of the handlebars, release the Allen bolt(s) on the underside or
front side of the stem. Turn the handlebars to the desired position. Make sure the
handlebars are accurately centred in the stem.
Carefully retighten the bolt(s) with the torque wrench. Make sure the upper and
lower clamping slots of the stem are parallel and identical in width. If you have a
stem with several bolts, tighten them evenly in a cross pattern by using a torque
wrench and observe the recommended torque values.
Try rotating the handlebars once clamped in the stem and tighten the bolt a
little more, if necessary. Use a torque wrench and never exceed the maximum
torque values! You will find the prescribed values directly on the components and/
or in the operating instructions of the component manufacturers on the enclosed
CD-ROM.
Adjusting the Brake Lever Reach on STEVENS City, Trekking,
Cross, Kids’ and Mountain Bikes
With most brake systems the distance between the brake levers and the han-
dlebar grips is adjustable. This gives in particular riders with small hands the
convenience of bringing the brake levers closer to the handlebars.
On most bicycles there is a small adjusting screw near the point where the
brake cable of a cable brake enters the brake lever unit or at the lever itself. Turn
the bolt clockwise and watch how the lever adjusts as you do so.
What to Bear in Mind with Time Trial Handlebars of STEVENS
Triathlon and Time Trial Machines
In triathlon sport and time trial, where a particularly aerodynamic seating posi-
tion is important, so called aero handlebars are used. With these aero models the
shift levers are often positioned at the handlebar ends, the brake levers at the ends
of bull-horn handlebars. When you ride with your back in a horizontal position, the
brake levers are out of reach and the reaction time is longer, which makes your
stopping distance longer. For this reason it is very important to anticipate problems
when riding.
Within certain limits the position of the handlebars can be adjusted according
to your personal preferences. That means that the straight part of the aero bars
should point only slightly downwards or upwards. The basic handlebars should
be parallel to the ground or point slightly upwards. Make sure your forearms are
always comfortably rested, i.e. your elbows should project beyond the armrests a
little towards the rear.
Danger:
Note that the distance you need to stop your bike increases, while riding
with the hands on the top handlebars. The brake levers are not always
within easy reach.
Danger:
Make sure you cannot pull the brake levers all the way to the handlebars.
Your maximum brake force should be reached short of this point.
Note:
There are brake levers/
shifters from Shima-
no and SRAM that
are suitable for small
hands. If you have any
problems with the brake
lever reach, contact your
STEVENS dealer.
S - 28 | English English | S - 29
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Stevens MTB - 2020 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Stevens MTB - 2020 in de taal/talen: Engels als bijlage per email.

De handleiding is 8.45 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Stevens MTB - 2020

Stevens MTB - 2020 Gebruiksaanwijzing - Deutsch - 28 pagina's

Stevens MTB - 2020 Gebruiksaanwijzing - Français - 28 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info