- 12 - - 13 -
Functional Warranty
This STEINEL product has been manufactured with
utmost care, tested for proper operation and safety
and then subjected to random sample inspection.
STEINEL guarantees that it is in perfect condition
and proper working order.
The warranty period is 36 months and starts on the
date of sale to the consumer. We will remedy defects
caused by material flaws or manufacturing faults.
The warranty will be met by repair or replacement of
defective parts at our own discretion. The warranty
shall not cover damage to wear parts, damage or
defects caused by improper treatment or mainten-
ance. Further consequential damage to other objects
is excluded.
Claims under the warranty will only be accepted if the
unit is sent fully assembled and well-packed with a
brief description of the fault, a receipt or invoice (date
of purchase and dealer's stamp) to the appropriate
Service Centre.
Repair service:
Please ask your nearest service
centre how to proceed for repairing
faults not covered by the warranty or
occurring after the warranty expires.
Declaration of Conformity
This product complies with
- Low Voltage Directive 2006/95/EC
- EMC Directive 2004/108/EC
- RoHS Directive 2011/65/EC
- WEEE Directive 2012/19/EC
Troubleshooting
Sensor-switched LED floodlight
without power
Sensor-switched LED floodlight
will not switch ON
Sensor-switched LED floodlight
will not switch OFF
Sensor-switched LED floodlight
switches ON when it should not
Malfunction
■ Fuse faulty, not switched ON,
break in wiring
■ Short circuit
■ Fit new fuse; switch ON
mains switch; check wiring
with voltage tester
■ Check connections
■ Twilight control set to night-time
mode during daytime operation
■ Mains power switch OFF
■ Fuse faulty
■ Detection zone not properly
targeted
■ Adjust setting
■ Switch ON
■ Fit new fuse, check connection
if necessary
■ Re-adjust
■ Continuous movement in the
detection zone
■ Check zone and readjust if
necessary or apply shroud
■ Wind is moving trees and
bushes in the detection zone
■ Cars in the street are being
detected
■ Sudden temperature changes
due to weather (wind, rain,
snow) or air expelled from fans,
open windows
■ Sensor-switched LED floodlight
is moving (swaying) due to gusts
of wind or heavy rain.
■ Change detection zone
■ Change detection zone
■ Adjust detection zone or install
in a different place
■ Mount sensor-switched LED
floodlight on a firm surface
Cause Remedy
Sensor-switched LED floodlight
keeps switching ON and OFF
■ Animals moving in the
detection zone
■ Tilt sensor higher or apply
specific shrouds; adjust zone,
or apply shrouds
Operation and Maintenance
The unit is not suitable for special burglary alarm
systems since it lacks the tampering protection pre-
scribed for this purpose. Weather can affect opera-
tion of the sensor-switched LED floodlight. Strong
gusts of wind, snow, rain and hail may cause the light
to come ON when it is not wanted because the sensor
is unable to distinguish sudden changes in tempera-
ture from sources of heat.
The detector lens may be cleaned with a damp cloth
if it gets dirty (do not use cleaning agents).
Permanent Light Function
If a mains switch is installed in the mains supply lead,
the light is capable of the following functions in add-
ition to the simple ON/OFF function:
Sensor operation
1) Switch light ON (when floodlight is OFF):
Switch OFF and ON once.
LEDs stay ON for the period selected.
2) Switch light OFF (when floodlight is ON):
Switch OFF and ON once.
Floodlight goes out or switches to sensor mode.
Manual override
1) Activate manual override:
Turn switch OFF and ON twice. The floodlight is set
to stay ON for 4 hours (red LED lights up behind the
lens). Then it returns automatically to sensor mode
(red LED OFF).
2) Deactivate manual override:
Switch OFF and ON once. Floodlight goes out or
switches to sensor mode.
Important:
The switch should be actuated in rapid succession
(in the 0.5 – 1 sec. range).
Technical Specifications
Sensor-switched LED floodlight XLed 10 XLed 25
Power supply: 230-240 V/50 Hz 230-240 V/50 Hz
Output: 10 LEDs, approx. 30 W 25 LEDs, approx. 62 W
Light colour: approx. 4100 kelvin (warm white) approx. 4100 kelvin (warm white)
Luminous flux: 2000 lumens 4000 lumens
Efficiency: 66.66 lm/W 64.52 lm/W
Additional switching capacity:
Filament bulbs, 800 W max. at 230 V AC
Fluorescent tube, 400 W max. at cos ϕ = 0.5,
inductive load at 230 V AC
Fluorescent lamps, low-energy lamps,
LED lights with electronic ballast at 230 V AC,
4 x 60 W each max., C ≤ 88 µF
Life of LEDs: up to 50,000 hrs. (for 3 hrs./day approx. 45 years)
Angle of coverage: 240° with sneak-by guard 240° with sneak-by guard
Detection reach: 12 m all round 12 m all round
Projected area: 250 cm
2
+ 103.36 cm
2
420 cm
2
+ 103.36 cm
2
Swivelling range of
sensor unit: ± 80° ± 80°
Swivelling range of housing: 200° vertically 200° vertically
270° horizontally 270° horizontally
Time setting: 5 sec. – 15 min. 5 sec. – 15 min.
Twilight setting: 2 – 2000 lux 2 – 2000 lux
Basic light level: 10% all night / 10 min. / OFF 10% all night / 10 min. / OFF
Permanent light ON: 4 hrs., selectable 4 hrs., selectable
Dimensions (h x w x d): 205 x 200 x 200 mm 300 x 200 x 200 mm
Weight: 2200 g 2960 g
Temperature range: -20 °C to +50 °C -20 °C to +50 °C
IP rating: IP 44 IP 44
Protection class: I I
GB
