592447
6
Verklein
Vergroot
Pagina terug
1/67
Pagina verder
- 10 - - 11 -
System components
ON/OFF button
feed trigger
LED indicator
socket for charging cable
USB charger
glue stick
Operating principle
and handling
Before using for the first time, fully
charge the battery (2-3 hours) so
as to prolong its life. (see Charging/
Operation)
Insert glue stick into rear heating
duct.
When using the tool for the first time,
press the trigger several times to fill
the heating chamber with adhesive. It
may also be necessary to give the glue
stick a short push to help it move in.
To prevent the applicator from being
switched ON unintentionally, you
must press the button for approx.
2 sec. Green LED flashes for 15 sec.
Press trigger and apply glue to one
side.
Firmly press together the materials
being glued, correcting alignment if
necessary.
Final bonding strength is reached
after a very short time (approx.
2 minutes)!
Spot glueing is recommended on long
items with large surfaces.
Rigid foam (e.g. polystyrene) can also
be glued without a problem. Merely
remember to apply the hot glue on
the base surface and not on the
polystyrene.
When glueing textiles or similar
materials, it is recommended to
apply the hot glue in "wavy" lines.
Let the applicator cool down
after use.
Charging / Operation
The rechargeable battery in the neo 1
comes partially charged. Before using
the applicator for the first time, fully
charge the battery (approx. 2-3 hours) to
ensure full capacity.
The neo 1 cannot be used while it is
charging.
Interrupting the charge cycle will not
damage the rechargeable battery. The
battery can be recharged at any time
without shortening its lifespan.
"Electronic Cell Protection (ECP)"
protects the battery from exhaustive
discharge. If the battery runs flat, pro-
tective circuitry switches the neo 1 OFF
and glue is no longer heated.
Charging with USB charger
Button LED red LED green
ON/OFF Battery charging
Applicator ready for use for a limited period
Battery is fully charged, charge cycle is completed
Operation / glueing
Button LED red LED green
ON Switch ON. Press button for approx. 2 sec.
Green LED fl ashes for 15 sec.
Applicator ready for use
Applicator starts for a further 5 min. each time you
press the trigger
No glueing for 5 min.
Applicator switches OFF
Switch applicator back ON at button
Red and green LED fl ashes alternately after
applicator has been in use for approx. 20 min.
The applicator can now only be used for approx.
another 10 min.
Red LED fl ashes 1x
Battery fl at, start charging using USB charger
Dimensions (HxWxD): 179 x 40 x 65 mm
Power supply: 100-240 V, 50/60 Hz, micro-USB charger
Battery voltage: 3.6-V lithium-ion rechargeable battery
Heating-up time: under 15 seconds
Rechargeable-battery run time: approx. 30 minutes (continuous operation)
Battery charging time: 90% in 3 hours
Melt temperature: approx. 170 °C
Recommended glue sticks: genuine STEINEL
Crystal sticks, Prod. No 040413 /
Ultrapower sticks, Prod. No. 0405005
(Ø 7 mm)
Technical Specifications
GB
Bdal_NEO 1_26-spr.indd 10-11Bdal_NEO 1_26-spr.indd 10-11 11.07.13 14:4711.07.13 14:47
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Steinel Neo 1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Steinel Neo 1 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 1,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info