758077
19
Verklein
Vergroot
Pagina terug
1/155
Pagina verder
- 36 - - 37 -
5. Mounting
Check all components for damage.
Do not use the product if it is damaged.
When installing the sensor-switched light, make sure the installation site is
not exposed to vibration.
Select an appropriate mounting location, taking the reach and motion
detection into consideration.
Mounting procedure (L 830, L 835, L 840SC/C)
Switch OFF power supply. (Fig.4.1)
Undo retaining screws and detach light cube from the wall mount. (Fig.5.1)
Mark drill holes (Fig.5.2)
Drill holes and fit wall plugs. (Fig.5.3)
Pierce sealing plug.
Installation with concealed power supply lead (Fig.5.4)
Installation with surface-mounted power supply lead (Fig.5.5)
Connect conductors (Fig.5.6)
Fit light cube onto wall mount (Fig.5.7)
Screw in retaining screws (Fig.5.7)
Switch ON power supply (Fig.5.7)
Make settings via app (SC only)
"6. Function"
Mounting procedure (GL 80SC/C)
Switch OFF power supply (Fig.4.1)
Undo retaining screw and remove light cube from the cover (Fig.5.8)
Pull cable through base plate and profile (Fig.5.9)
Screw base plate to profile (Fig.5.10)
Mark base plate drill holes (Fig.5.11)
Drill holes and insert screw anchors (Fig.5.12)
Screw base plate to the floor/ground (Fig.5.13)
Screw cover onto profile (Fig.5.14)
Connect conductors (Fig.5.15)
Fit light cube to cover (Fig.5.16)
Screw in retaining screw (Fig.5.16)
Switch ON power supply (Fig.5.16)
Make settings via app (SC only)
"6. Function"
6. Function
The functions can be set for the SC types.
Functions are set via the Smart Remote app.
Smart Remote app
To configure the light via smartphone or tablet, you must download the
STEINEL Smart Remote app from your app store. You will need a Blue-
tooth-capable smartphone or tablet.
Android iOS
Functions that can be set via Smart Remote app are:
Time setting
Reach adjustment
Twilight setting
Night-light function
Main light / night light level can be adjusted
Extended reach adjustment
Group interconnection
Twilight setting by teach-in
Time setting (stay-ON time)
The light's ON time can be set to any period from approx. 5 seconds to a
maximum of 60minutes. Any movement detected before this time elapses will
restart the timer.
This function only ever applies to the C types in combination with a
Bluetooth sensor-switched product.
Note:
After the light switches OFF, it takes approx. 1 second before it is able to start
detecting movement again. The light will only switch ON in response to
movement once this period has elapsed.
The shortest time setting is recommended when adjusting the detection zone
and performing the functional test.
Reach setting (sensitivity)
Reach is the term used to describe the diameter of the more or less circular
detection zone produced on the ground after mounting the sensor-switched
light at a height of 2 m.
Control dial set to maximum = max. reach (5 m)
Control dial set to minimum = min. reach (1 m)
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Steinel L 830 C bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Steinel L 830 C in de taal/talen: Alle talen als bijlage per email.

De handleiding is 6,06 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info