592544
8
Verklein
Vergroot
Pagina terug
1/66
Pagina verder
1514
y Disconnect the power supply
before attempting any work on
the motion detector.
y During installation, the electric
power cable to be connected must
be voltage-free.Therefore, switch
off the power first and check free-
dom from voltage with a voltage
detector.
y Installing the motion detector in-
volves work on the mains power
supply. This work must therefore be
carried out professionally in accord-
ance with the applicable national
wiring regulations and electrical
operating conditions (
D
- VDE
0100,
A
- ÖVE-EN 1,
- SEV
1000).
Safety instructions
Principle
Lights, alarms, and many other things
triggered by movement - for your con-
venience and safety.
Whether a house door, garage, patio
or carport, stairs, a storeroom or cellar
are involved, this infrared motion de-
tector is rapidly installed and ready for
operation anywhere.
The IS 240 DUO is equipped with two
120° pyro sensors which detect the
invisible heat emitted by moving ob-
jects (pedestrians, animals etc.).
The heat thus detected is electroni-
cally converted and switches ON con-
nected consumers (e.g. a light). No
heat radiation is detected through ob-
stacles, such as walls or glass and no
switching therefore occurs. The two
pyro sensors have a detection angle
of 240° with an opening angle of 180°.
Important: the safest motion detec-
tion is obtained when the device is
mounted and aligned laterally to the
walking direction and no obstacles
(such as trees and walls, for example)
obstruct the view.
Installation instructions
Installation
1) Supply lead
2) Service lead
3) Protective-earth
conductor
4) Lugs for surface-routed
supply lead
y Wall mounting
Warning: installation involves a
mains connection. With 230 V, a
risk of electrocution exists! There-
fore, switch off the power first and
check freedom from voltage with a
voltage tester. Installation of the
sensor involves work on the mains
power supply; this work must
therefore be carried out profession-
ally in accordance with regulations.
Please note that the motion detec-
tor must be protected by a 10 A cir-
cuit breaker.
The installation site should be at
least 50 cm from a light, since the
latter's heat radiation could result in
false triggering of the sensor. The
installation height should be ap-
prox. 2 m.
Unscrew the fastening screw 5
counterclockwise with a screw-
driver, slide down the mounting
plate 1 and remove it. Do not undo
the internal wiring to the terminal
block, but extract the block by
pulling it gently.
Insert the rubber plugs into the
mounting plate. Hold the mounting
plate against the wall and mark the
drill holes (paying attention to the
wiring arrangement in the wall), drill
the holes and insert the dowels.
In order to be able to perform a
switching operation, a power sup-
ply lead with at least two phases
must run to the unit and a second
lead out to the consumer. The two
rubber plugs can be pierced for this
purpose with a screwdriver.
Two lugs are provided on the bot-
tom of the wall fastener for surface
wiring. These can be snapped off
easily. After passing the wiring
through, the mounting plate can
be screwed in place.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Steinel-IS-240-DUO

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Steinel IS 240 DUO bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Steinel IS 240 DUO in de taal/talen: Alle talen als bijlage per email.

De handleiding is 0,93 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Steinel IS 240 DUO

Steinel IS 240 DUO Gebruiksaanwijzing - Deutsch, English, Polski - 66 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info