593154
14
Verklein
Vergroot
Pagina terug
1/43
Pagina verder
- 26 - - 27 -
Potentiometer g
Potentiometer h
Potentiometer o
• Setting1min.–2hr.
• Turnedfullyclockwise:max
• Turnedfullyanti-clockwise:min
• Setting0sec.–10min.
• Turnedfullyclockwise:
Room surveillance
• Turnedfullyanticlockwise:
0 sec. (OFF)
Turning the potentiometer to the
"Surveillance" setting reduces the
sensitivity of the "Presence"
switching output.
The contact only closes on detect-
ing a pronounced movement, sig-
nalising with a high degree of cer-
tainty that persons are present.
The stay-ON time remains active.
The switch-ON delay is inactivated.
Switch-ON delay for switching output 2 HVAC
Reach adjustment
COM 2
Potentiometer i
Provides basic illumination for the
selected stay-ON time when ambi-
ent light falls below the selected
light-level threshold that is set.
This can be dimmed to 10% of
maximum light intensity. As soon
as a person enters the scene, the
detector switches either to 100%
light intensity (constant-lighting
controller OFF) or adjusts to the
preselected light level (con-
stant-lighting controller ON). When
no movement is being detected,
the detector dims back to basic
light level after the stay-ON time
expires. This is switched OFF when
stay-ON time (1 min. – 30 min.) has
expired or the daylight component
is sufficient to exceed the selected
level of brightness. In the ON set-
ting, the detector switches basic
light level ON and OFF as soon as
the level of light falls below the
light-level threshold.
Basic light level (DIM version)
Stay-ON time for switching output 2 HVAC
The reach required (response
threshold) is infinitely variable.
< US 360 / DualTech
at least 2 x 2 m - 6 x 6 m
presence
< Single US / Dual US
at least 3 x 3 m - 10 x 3 m
in each direction
Turned fully anticlockwise =
minimum reach
Turned fully clockwise
(factory setting) = maximum reach
The master/slave configuration
permits detection of movement in
large-type rooms or spaces (load
connected = master, no load =
slave). The level of brightness pre-
vailing in the room is only evaluat-
ed at the master. The slaves report
movements detected to the mas-
ter. Lighting or HVAC is switched
ON and OFF by the master only.
Master/slave
A parallel-connected configuration
also permits the use of several
masters. In this case, each master
operates the lighting group in ac-
cordance with the level of bright-
ness it measures. Delay times and
light-level thresholds are selected
at each master as required. The
switched load is spread among the
individual masters. Presence is still
detected collectively by all detec-
tors. The presence output can be
picked off from any master.
Master/master
Remote control
Using the remote control (option-
al), functions can be conveniently
activated from the floor.
Note: The pulse mode cannot be
overridden by the remote control.
Switch pulse mode OFF manually.
Presence Control remote control
unit: EAN no: 4007841 559410
Parallel-connected configurations
Two detectors linked with an
external stairwell lighting
timer
Old building / building
modernisation
External light source activated by
button. No twilight mode, day
mode only.
Detector as stairwell lighting
timer
14.1
14.2
14.3
14.4
When using several detectors, they
must be connected to the same
phase!
As many as 10 sensors can be
connected in parallel.
DIM detector
14.5
This external button cable is
not intended to serve as a
neutral conductor connec-
tion for loads (see page 6/7).
*
GB
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Steinel DualTech bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Steinel DualTech in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Pools, Zweeds als bijlage per email.

De handleiding is 4,64 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info