593155
13
Verklein
Vergroot
Pagina terug
1/43
Pagina verder
- 24 - - 25 -
DIP 6 / 7 / 8
Trigger mode
The trigger mode enables the user to choose which sensing technologies should be used
to initially turn the load on and which technologies are required to keep it on. The following
settings are possible:
DualTech COM1 / COM2 / DIM
Both: Requires movement recognition by PIR and US
Either: Requires movement recognition by PIR or US
PIR: Requires movement recognition by PIR
US: Requires movement recognition by US
Inital occupancy:
Sensor technology used to turn the load on (PIR, US, Both, Either)
Maintain Occupancy:
Sensor technology used to keep the load on after initial occupancy (PIR, US, Both, Either)
The trigger mode is selected by DIP switches 6, 7 and 8.
on
1 2 3 4 5 6 7 8
TEST
MODE
MANUAL
ON / OFF
CONST.
OFF
NORMAL
MODE
AUTO
ON
CONST.
ON
TRIGGER MODE
Trigger mode
options n
Initial presence
Maintain
presence:
DIP
6
DIP
7
DIP
8
Option 1 Both Either OFF OFF OFF
Option 2 Both Both OFF OFF ON
Option 3 PIR Either OFF ON OFF
Option 4 US Either OFF ON ON
Option 5 (factory setting) Either Either ON OFF OFF
Option 6 US US ON OFF ON
Option 7 PIR PIR ON ON OFF
Option 8 Either Both ON ON ON
Functions – Settings by potentiometer
Examples of use Light-level settings
Night-time mode min
Corridors, foyers 1
Stairs, escalators, moving walkways 2
Washrooms, toilets, switchrooms, canteens 3
Sales floor, kindergartens, nursery school rooms,
sports halls
4
Work rooms: offices, conference and meeting
rooms, precision assembly activities, kitchens
5
Working areas requiring good light:
Laboratory, technical drawing, precision work
>=6
Daylight mode max
Stay-ON time for switching
output 1
Setting 30 sec. – 30 min.
The chosen stay-ON time is in-
finitely variable from a minimum
of approx. 30 sec. to a maximum
of 30 min. Intrinsic light is cali-
brated after 3 min. When the
threshold is exceeded, the sensor
switches OFF after the stay-ON
time expires.
Time setting
If the dial is set to (fully an-
ti-clockwise), the unit is in pulse
mode, i.e. the output is switched
ON for approx. 2 sec. (e.g. for stair-
well lighting timer). Afterwards,
the sensor does not react to move-
ment for approx. 8 sec. Day mode
is the only mode possible here be-
cause of dazzle by light from exter-
nal sources.
Turned fully clockwise: The stay-
ON time is self-learning and ad-
justs dynamically to user behav-
iour.
The optimum time cycle is deter-
mined by means of a learning al-
gorithm.
The shortest time is 5 min., the
longest 20 min.
Pulse mode (except DIM)
IQ-Modus
The chosen response threshold
can be infinitely varied from ap-
prox. 10 – 1000 lux.
Control dial turned fully clockwise:
MAX daylight mode
Control dial turned fully
anti-clockwise: MIN night mode
Depending on the site of installa-
tion, the setting may need to be
corrected by 1-2 marks on the
scale.
Twilight setting
Potentiometer e
Potentiometer f
COM 1 + COM 2
Note: Depending on the site of installation, the setting may need to be corrected by 1 – 2 marks on the scale.
The light level is measured at the sensor.
GB
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Steinel Dual US bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Steinel Dual US in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Pools, Zweeds als bijlage per email.

De handleiding is 4,64 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info