715258
18
Verklein
Vergroot
Pagina terug
1/70
Pagina verder
18
Getting started
The appliance is suitable for heating water only, everything else blocks the pump.
Safely install the device into a pot. The pot must be as high that the device hangs
into the water up till the marking “max” and a distance of at least 1 cm to the
ground is kept in order not to block the water circulation.
Please fill the pot with lukewarm water before use. Pay attention that the water,
together with the food, reaches the marking “max”.
Plug in the device.
If the water level is “min”, EE1 appears on the display and the device beeps three
times.
Setting the temperature and time
Switch on the device. The symbol ON/OFF, the power control light and the tem-
perature indication light up in blue. The device is in stand-by mode.
The operation of the touch screen works better with grease-free fingers.
Pres the ON/OFF button once, the temperature indication lights in °C. Note: if the
ON/OFF button is pressed for more than 3 seconds, you can choose between °C
and °F.
Use the +/- buttons to set the desired temperature in steps of 0,C up to 90°C.
Press the setting button once. The timer indication is blinking. Use the +/- buttons
to set the desired hours in steps of 1 hour up to 99 hours. By pressing the setting
button again, the minutes can be set in steps of 1 minute up to 59 minutes.
The program will be started by pressing the ON/OFF button, all LED’s of the display
are shining in blue.
After reaching the selected temperature, the device beeps twice, the blue LED
flashes and the timer starts to count down.
After the time has elapsed, the device beeps 3 times and the display shows “END”.
The power control light shines in red.
Plug off the device.
If you want to change the temperature or time during the cooking process, press
the ON/OFF button for 3 seconds. Then, temperature and time can be changed as
described above. Then, restart the device.
Water quantity
Do not put too much water in the device - leave sufficient room for the food. If neces-
sary, top up water until Max. The unit can be switched on only when the water level
reaches the max marking. The food must always be covered with water. The tempe-
rature sensor needs a couple of minutes until he adjusted to the set temperature if
pre-heated water is filled in. If there is no water in the pot, the device will not turn
on and beeps EE1. Turn off the appliance, add water and start again.
The water level sensor switches off the appliance when the water level drops
rapidly
If you plug the device out, or if you have a power outage, the unit remembers
the last set values.
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Steba SV 80 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Steba SV 80 in de taal/talen: Nederlands, Duits, Engels, Frans, Deens, Zweeds als bijlage per email.

De handleiding is 1,36 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info