Usuage:
Plug the appliance in. The whole display is illuminated for a short time.
Touch the ON/Off button , the cooling fan starts to work.
Im display 2000W can be seen, the large cooking area is heated up.
With the button the power can be changed. 2000/1800/1600/1400/1200 Watt.
When the small cooking area should be used then the left button should be tou-
ched . In the display 1000W can be seen.
With the button the power can be changed. 1000/800/500/300/100 Watt.
The plate gets very hot. The residual heat light is illuminated and the
cooling fan is working. Do not remove the plug from the socket until the
cooling fan stops by itself.
To adjust the Timer the button should be touched. By touching the button for
a short time the time is changed in steps of one minute. If the button is touched for a
longer time then the timer changes in steps of 10min up to a max of two hours.
If the time is not changed within 5 seconds the timer function will be deleted and it
must be restarted.
With the button the child lock can be activated. Should the child lock be deactiva-
ted then the button must be touched for three seconds.
How to Clean
Disconnect plug and wait until it is cooled down. Clean after each use. ∙
If the pots/pans are used without being cleaned, discoloration or cooked on stains ∙
may be caused.
Do not use petrol, thinner, scrubbing brush or polishing power to clean the induc- ∙
tion cooker.
Wipe using dish washing agent and damp cloth. ∙
Use vacuum cleaner to suck up dirt from the air intake and exhaust vent. ∙
Never run water over the unit. (water gets inside may cause malfunction). ∙
