720783
7
Verklein
Vergroot
Pagina terug
1/11
Pagina verder
7
ENGLISH
Features (Fig. A)
1. Collet chuck
2. Collet nut
3. Shaft cover
4. Ventilation slots
5. Cable
6. Toggle switch
7. Grinding Wheel
8. Spindle
9. Spanner
10. Front handle
11. Primary handle
Operating Instructions
1. Power supply
The power tool supply must match the nameplate data.
2. Installing wheel (Fig. B)
Warning! Only use grinding wheels with
maximum safe operating speed rated at or
above 40m/s. Ensure the grinding wheel is
correctly mounted and tightened, run the tool at no-load
speed for 30 secondes in safe position before using. Stop
immediately if there is considerable vibration or other
defects are detected. Never use damaged grinding wheels
or rimous ones.
a. Mount the spanner (9) to the spindle (8) and loosen the
clamping nut (2) with another spanner.
b. Insert the grinding wheel (7) shaft into the collet chuck
(1) as far as it can go.
c. Tighten the collet chuck (1) securely by spanners.
d. The maximum recommended diameter of mounted
wheel is 25mm.
e. The maximum recommended mandrel length of
mounted wheel is 24.5mm.
3. Switching on and off
Warning! Make sure you can control the switch
freely and keep it off before plugging in.
a. ON: Shift switch (6) to “I”. (Fig. E).
b. OFF: Shift switch (6) to “O”. (Fig E).
c. Let the wheel reach full speed before grinding.
d. Once the safety brush worn, grinder turns off
automatically to avoid motor damage. Motor was
damaged.
e. After inspecting and installing an accessory, run the
power tool at maximum no-load speed for five minutes
before any work.
Standard Attachments
1. Collet
2. Two Spanners (17mm)
Be sure to check the attachments as it is subject to change
by areas and models.
Application
Warning! To reduce the risk of injury, electric shock
and damage to the tool, before any work check the
utility lines electricity, gas or water supply line are
hidden in the work area.
Warning! Firmly grasp primary hold part of tool and
side handle before starting.
Grinding Application
a. Optimum grinding results are achieved when the
grinding tool is moved uniformly back and forth with light
pressure.
b. Pressure that is too strong reduces the performance
capability of the tool and cause the grinding to exhaust
more quickly.
c. Be sure that the distance between the top of collet chuck
and bottom of the grinding wheel is less than 8mm and
between the top of collet chuck and top of grinding wheel
is less than 45mm to prevent vibration of the tool and
unexpected accidents.(Fig. D)
Warning! Sparks generated when grinding
metal.Take care that no combustible material
presented on the area of flying sparks.
(Original instructions)
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Stanley STDG5006 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Stanley STDG5006 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,77 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info