720797
17
Verklein
Vergroot
Pagina terug
1/174
Pagina verder
17
Do not operate the meter with the battery cover or portions of the
case removed or loosened.
To avoid false readings, which could lead to possible electric shock
or personal injury, replace the battery as soon as the low battery
indicator (”
”)appears.
Do not use the meter in a manner not specified by this manual or the
safety features of the meter may be impaired.
When in Relative mode (the symbol
is displayed) or in Data
Hold mode (the symbol
is displayed), caution must be used
because hazardous voltage may be present.
Do not touch any naked conductor with hand or skin.
Do not ground yourself.
Do not operate this meter if your hand or the meter is wet.
Adhere to local and national safety codes. Use Individual protective
equipment to prevent shock and arc blast injury when working in an
area where hazardous live conductors are exposed.
Use only the test leads specified by the factory.
During replacement of fuses, please only use the spare fuses from
Stanley Fatmax.
Remaining endangerment: When an input terminal is connected to
dangerous live potential it is to be noted that this potential at all other
terminals can occur!
CAT III - Measurement category III is for measurements performed
in the building installation. Examples are measurements on distribution
boards, circuit breakers, wiring, including cables, bus-bars, junction
boxes, switches, socket-outlets in the fixed installation, and equipment
for industrial use and some other equipment, for example, stationary
motors with permanent connection to fixed installation. Do not use the
meter for measurements within Measurement Categories IV.
Caution
To avoid possible damage to the meter or to the equipment under test,
follow these guidelines:
Disconnect circuit power and discharge all capacitors before testing
resistance, diode, capacitor and continuity.
Use the proper terminals, function, and range for your
measurements.
Before measuring current, check the meter‘s fuses and turn off the
power to the circuit before connecting the meter to the circuit.
Before rotating the range switch to change functions, disconnect
test leads from the circuit under test.
Symbol
Alternating Current
Direct Current
DC orAC
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Stanley FMHT0-77421 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Stanley FMHT0-77421 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens als bijlage per email.

De handleiding is 17,25 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info